The advantage of inserting the page number field is that the page number field could show the current page number.
The following information should be relevant with respect to the page number:
- The page number field & the actual page number should be formatted.
- The page number field & the actual page number both could be inserted into the header or footer.
- The page number field & the actual page number could be easily inserted into the document.
Therefore we can conclude that the advantage of inserting the page number field is that the page number field could show the current page number.
Learn more about the page number here: brainly.com/question/3063419
<span>An associate's degree requires two years of academic study and is the highest degree available at a community college</span>
Explanation:
Exterior gateway protocol are the routing protocols that are used on the internet for exchanging routing information among the autonomous system. These autonomous systems can be gateway protocol, vector routing protocol.
Answer:
For 32 bits Instruction Format:
OPCODE DR SR1 SR2 Unused bits
a) Minimum number of bits required to represent the OPCODE = 3 bits
There are 8 opcodes. Patterns required for these opcodes must be unique. For this purpose, take log base 2 of 8 and then ceil the result.
Ceil (log2 (8)) = 3
b) Minimum number of bits For Destination Register(DR) = 4 bits
There are 10 registers. For unique register values take log base 2 of 10 and then ceil the value. 4 bits are required for each register. Hence, DR, SR1 and SR2 all require 12 bits in all.
Ceil (log2 (10)) = 4
c) Maximum number of UNUSED bits in Instruction encoding = 17 bits
Total number of bits used = bits used for registers + bits used for OPCODE
= 12 + 3 = 15
Total number of bits for instruction format = 32
Maximum No. of Unused bits = 32 – 15 = 17 bits
OPCODE DR SR1 SR2 Unused bits
3 bits 4 bits 4 bits 4 bits 17 bits
