answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Vinvika [58]
2 years ago
6

A fluid flows steadily through a pipe with a uniform cross sectional area. The density of the fluid decreases to half its initia

l value as it flows through the pipe. The correct statement about the average velocity V is:_______
flow
rho1 → rho2= rho1
V1 → V2= ?

a. V2 equals 2V1.
b. V2 equals V1/2.
c. V2 equals V1.
d. V2 equals V1/4.
e. V2 equals 4V1.
Engineering
1 answer:
Vikentia [17]2 years ago
5 0

Answer:

c. V2 equals V1

Explanation:

We can answer this question by using the continuity equation, which states that:

A_1 v_1 = A_2 v_2 (1)

where

A1 is the cross-sectional area in the first section of the pipe

A2 is the cross-sectional area in the second section of the pipe

v1 is the velocity of the fluid in the first section of the pipe

v2 is the velocity of the fluid in the second section of the pipe

In this problem, we are told that the pipe has a uniform cross sectional area, so:

A1 = A2

As a consequence, according to eq.(1), this means that

v1 = v2

so, the velocity of the fluid in the pipe does not change.

You might be interested in
Water (cp = 4180 J/kg·°C) enters the 2.5 cm internal diameter tube of a double-pipe counter-flow heat exchanger at 17°C at a rat
aksik [14]

Answer:

Length = 129.55m, 129.55m

Explanation:

Given:

cp of water = 4180 J/kg·°C

Diameter, D = 2.5 cm

Temperature of water in =  17°C

Temperature of water out = 80°C

mass rate of water =1.8 kg/s.

Steam condensing at 120°C

Temperature at saturation = 120°C

hfg of steam at 120°C = 2203 kJ/kg

overall heat transfer coefficient of the heat exchanger = 700 W/m2 ·°C

U = 700 W/m2 ·°C

Since Temperature of steam is at saturation,

temperature of steam going in = temperature of steam out = 120°C

Energy balance:

Heat gained by water = Heat loss by steam

Let specific capacity of steam = 2010kJ/Kg .°C

Find attached the full solution to the question.

3 0
2 years ago
Annealing is a process by which steel is reheated and then cooled to make it less brittle. Consider the reheat stage for a 100-m
kodGreya [7K]

Complete question is;

Annealing is a process by which steel is reheated and then cooled to make it less brittle. Consider the reheat stage for a 100 mm thick plate (ρ = 7830 kg/m3, Cp = 550 J/kg K, k = 48 W/m K). The plate initially is at 200 °C and is to be heated to a minimum temperature of 550 °C. Heating is effected in a gas-fired furnace where the products of combustion at T∞ = 800 °C maintain a convection heat transfer coefficient of h = 250 W/m.K on both surfaces of the plate. How long should the plate be left in the furnace?

Answer:

860 seconds

Explanation:

We are given;

Initial Temperature; Ti = 200 °C

Minimum Temperature; T_i = 550 °C

T∞ = 800 °C

convection coefficient; h = 250 W/m².K

ρ = 7830 kg/m³

Cp = 550 J/kg K

k = 48 W/m K

Plate thickness = 100mm

Thus,L = 100/2 = 50mm = 0.05 m

Let's find the biot number from the formula;

Bi = hL/K

Bi = (250 × 0.05)/48

Bi = 0.2604

Now, lowest temperature in the slab is given as;

θ_o = (T_o - T∞)/(T_i - T∞)

θ_o = (550 - 800)/(200 - 800)

θ_o = 0.4167

Now, from online tables calculation, we can find the root of the biot number.

Thus, root of the biot number Bi = 0.2604 is;

ζ1 = 0.488 rad

Also, C1 is gotten as 1.0396

Now,formula for thermal diffusivity is;

α = k/ρc

α = 48/(7830 × 550)

α = 1.115 × 10^(-5) m²/s

Also, from online tables, f(ζ1) = 0.401

Thus, we can find the time the plate should the plate be left in the furnace from;

-(ζ1)²(αt/L²) = In 0.401

-(ζ1)²(αt/L²) = -0.9138

t = (-0.9138 × 0.05²)/-(0.488² × 1.115 × 10^(-5))

t ≈ 860 s

8 0
2 years ago
Identify an object in your house that contains a physical system and list three questions you could use to define the system
jonny [76]

Answer:

ALL CAREFULLY ANSWERED CORRECTLY

Explanation:

1) A loaf of Bread PHYSICAL SYSTEM

✓ How can the environment affect the edibility of the bread

✓ What are the constituents that makes up the bread

✓ What process is involved in these constituents mixing to form the loaf.

2) The law of thermodynamics makes us to understand that when heat/energy passes through a system, the systems internal energy changes with respect to the conservation of energy law. That is energy lost = energy gained. Typically, ice would melt in a cup of hot tea because of the thermal energy in the molecules of the hot tea. When you heat a material, you are adding thermal kinetic energy to its molecules and usually raising its temperature. The temperature of the ice raises due to the kinetic energy added to it and it melts to water.

3) The theory of systems view the world as a complex system of interconnected parts. If we consider the society; (financial systems, political systems, etc) we will agree that they individually have their own components and it's the summation of this components that makes the system, this implies that system thinking could be applicable in this kinda of systems as long as they are made up of components.

4) Technology has boosted every sector of our lives and it has the capacity to do more. Restricting it's importance to entertainment alone would be an underusing of its potentials. Engineering students infact should not need any drive to be encouraged about maximizing all it can do in shaping our world.

5) ~ Nature shows its splendid soul

~Never ceases to leave us in amazement

~And we are in love

4 0
2 years ago
Water flows at a rate of 10 gallons per minute in a new horizontal 0.75?in. diameter galvanized iron pipe. Determine the pressur
ruslelena [56]

Answer:

\frac{\delta p }{l} = 30.4 lb/ft^3

Explanation:

Given data:

flow rate = 10 gallon per  minute = 0.0223 ft^3/sec

diameter = 0.75 inch

we know discharge is given as

Q =  VA

solve for velocity V = \frac{Q}{A}[/tex]

V = \frac{0.223}{\frac{\pi}{4} \frac{0.75}{12}}

V = 7.27 ft/sec

we know that Reynold number

Re = \frac{VD}{\nu}

Re = \frac{7.27 \times \frac{0.75}{12}}{1.21\times 10^{-5}}

Re = 3.76 \times 10^4

calculate the \frac{\epsilon }{D}ratio to determine the fanning friction f

\frac{\epsilon }{D} = \frac{0.0005}{\frac{0.75}{12}} = 0.008

from moody diagram f value corresonding to Re and \frac{\epsilon }{D}is 0.037

for horizontal pipe

\delta p = \frac{f l \rho v^2}{2D}

\frac{\delta p }{l} = \frac{1 \times 0.037 \times 1.94 \times 7.27}{\frac{0.75}{12}}

where 1.94 slug/ft^3is density of  water

\frac{\delta p }{l} = 30.4 lb/ft^3

3 0
2 years ago
True or False: Drag and tailwind are examples of a contact force.<br> tyy guyss
zloy xaker [14]

Answer:

False

Explanation:

8 0
2 years ago
Other questions:
  • A rod is 2m long at temperature of 10oC. Find the expansion of the rod, when the temperature is raised to 80oC. If this expansio
    7·1 answer
  • A 60-kg woman holds a 9-kg package as she stands within an elevator which briefly accelerates upward at a rate of g/4. Determine
    14·1 answer
  • A thin metal disk of mass m=2.00 x 10^-3 kg and radius R=2.20cm is attached at its center to a long fiber. When the disk is turn
    11·1 answer
  • At a certain college, 30% of the students major in engineering, 20% play club sports, and 10% both major in engineering and play
    14·1 answer
  • A sign erected on uneven ground is guyed by cables EF and EG. If the force exerted by cable EF at E is 46 lb, determine the mome
    13·1 answer
  • ) A shaft encoder is to be used with a 50 mm radius tracking wheel to monitor linear displacement. If the encoder produces 256 p
    15·1 answer
  • Refrigerant-134a enters the coils of the evaporator of a refrigeration system as a saturated liquid–vapor mixture at a pressure
    5·1 answer
  • When comparing solids to fluids, the following is true: for elastic solids, the stress must be normal. For Newtonian fluids, the
    9·1 answer
  • Draw an ERD for each of the following situations. (If you believe that you need to make additional assumptions, clearly state th
    15·1 answer
  • Who want to play "1v1 lol unblocked games 76"
    7·2 answers
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!