Answer:
<u>The total time elapsed from the time a bit is created (from the original analog signal at Host A) until the bit is decoded (as part of the analog signal at Host B is </u><u>25.11 ms</u>
Explanation:
Host A first converts the analog signal to a digital 64kbps stream and then groups it into 56-byte packets. The time taken for this can be calculated as:
time taken 1= 
= (56 x 8) bits / 64 x 10³ bits/s
= 7 x 10⁻³s
time taken 1= 7 ms
The transmission rate of the packet from Host A to Host B is 4 Mbps. The time taken to transfer the packets can be calculated as:
time taken 2= (56 x 8) bits / 4 x 10⁶ bits/s
= 1.12 x 10⁻⁴ s
time taken 2= 112 μs
The propagation delay is 18 ms.
To calculate the total time elapsed, we need to add up all the time taken at each individual stage.
<u />
<u> = Time taken 1 + Time taken 2 + Propagation Delay</u>
= 7 ms + 112 μs + 18 ms
= 0.025112 s
= 25.11 ms
Answer:
Continuous Integration
Explanation:
In continuous integration process, A program or piece of code is edited, tested and validated by team of software developers or contributors to complete and deploy the single project. This practice will improve the quality and reliability of the code.
Improvement, delivery and deployment are the three different phases, to complete the process of continuous integration.The individuals who contribute in a code or program in terms of improvement, delivery and deployment make a team that leads to continuous integration.
So, Agile team Continuously adapt Continuous Integration to new circumstances and enhance the methods of value delivery.
The correct answer is A. Familiar words for clues
Explanation:
Finding unfamiliar words is common while reading, especially in texts that belong to a specific field such as medicine, technology, etc. This can be handled through multiple strategies such as using a dictionary, guessing the meaning of the word based on its parts, and using context clues.
In this context, one of the easiest and most time-saving strategy is the use of context clues that implies using the familiar words as clues to guess the meaning of an unfamiliar word. This is effective because in most cases the meaning of an unknown word can be determined using the context of the word or words around the unknown word. Also, this strategy takes little time because you only need to analyze the sentence or paragraph where the unknown word is. Thus, the time-saving strategy to define unfamiliar words involves using familiar words for clues.
One factor affecting digital camera quality is the number of pixels, measured in megapixels, use to store the data for each image.
Answer:
The true statements are:
There is an assembler directive to arrange / place floating point values in static data memory
MARS always uses setting '.set boat'
Explanation:
It is the assembler directive who arranges and places the floating point values for the static data memory. Obviously there is no such way for the MIPS assemble programming for reservation of the static data memory without having any initialization for a considerable value.
MARS would definitely use the setting set “noat” ascii would store the string in the memory and then terminate it with respect to NULL character. They cannot reserve the MIPS assembly programming for a considerable value.
