Answer:
A
At my place of employment (which is a knowledge based business) the IT function integrates with all aspect of the operations which include:
- top management,
- business units,
- customers,
- non-IT suppliers, and
- IT providers.
The IT function manages the entire information technology value chain within the organisation. It provides solutions with regard to the software and hardware IT infrastructure.
We have a locally developed software which forms the frame work upon which our business rests. We refer to this as the Primary Production software. Other software which come preinstalled or post-installed on our machines are referred to as Secondary Production softwares.
All the hardware upon which the Primary and Secondary Production software run on are also managed the the IT Unit.
Every aspect of our operations described above must at somepoint interface or require the expertise of the IT Unit.
Our customers rely on the Primary software.
Business Units must a manager key functions for the Primary software on the backend and rely on secondary production software for other administrative tasks.
B
Please see attached the organisational chart that shows how the above relationships interplay.
C
At our organization, it is critical for the IT function to be centralized.
All decisions are made from the IT unit of the head quarters and cascaded into business units and other IT units at various branch locations.
Answer: Sole Proprietorship.
Explanation:
This question wants to know what type of business is described in the scenario.
In a Sole Proprietorship, the owner of the business is essentially the business itself. They control all aspects of the business from the operating activities to the financial activities of the firm. This is usually the first stage business type in an entrepreneurship.
The definition of a sole proprietorship above fits with what Doug does. Doug is the owner of the farming business and seems to be handling all aspects of it by himself. This would therefore make it a sole proprietorship.
Answer:
Check the explanation
Explanation:
A packet filter firewall is used as a check point between internal corporate network to the outside internet. It blocks all the inbound traffic from the outside hosts trying to initiate a direct TCP connection to the internal corporate webserver. The network design with firewall is shown in the attached image below:
The figures in the attached image below shows an internal corporate network is protected with a packet filter firewall to minimize the inbound traffic from the external network or an internet. Therefore, the packet filter is used as a check point between the network.
The packet filter blocks all attempts by the outside hosts in order to initiate a direct TCP connection to the internal webserver of the internal corporate network.
Going by the second part of the attached image below can can therefore conclude that:
• Rule 1 specifies that, deny any packet with the destination address 5.6.7.8 if the STN flag of TCP header is set.
• Rule 2 specifies that, allow the inbound email traffic from the external source.
• Rule 3 specifies, allows the Outbound TCP traffic from the internal corporate network.
• Rule 4 specifies, allows outbound Email traffic from the internal corporate network to the external network.
• Rule 5 specifies, block any traffic from any source to the any destination.
Answer:
Category 6 Cabling
Explanation:
Category 6 cables are High-performance UTP cable that can transmit data 10/100/1000Mbps transfer and up to 10Gbps over shorter distances. They usually make uses of a longitudinal separator, this seperators always tend to separates each of the four pairs of wires from each other.
A twisted-pair cable is a cables that is mostly made of copper wires that are twisted around each other and are surrounded by a plastic jacket, twisted pair cables are majorly used for networking.
There are two types of twisted pair cable,
UTP (Unshielded Twisted Pair) are a type of twisted pair cabling that does not include shielding around its conductors.
STP(shielded twisted pair) are types of twisted pair cabling that does include shield around its conductors.
A category 6 cable can eithet be pure copper UTP or STP.
And they are best for networking.
Hi!
The purpose of CSS is to edit and change the appearance of a website without having to go and change any of the HTML code.
Hopefully, this helps! =)
