Answer:
d. Port mirror
Explanation:
Port mirroring is a method to monitor network traffic and it is used in the Intrusion Detection Systems. It is also called Switched Port Analyzer and is used to analyse the network errors. This technique basically copies the network packets and sends or transmits these copied packed from one port to another in a network device such as a switch. This means that this technique is used to copy the network packets from one switch port and send the copy of these packets to another port where these packets are monitored. This is how it analyses the network errors and incoming traffic for irregular behavior and also this can be done without affecting the normal operation of the switch and other network processes. It is simple, inexpensive and easy to establish and use. The most important advantage of using mirrored ports is that it catches the traffic on several ports at once or can capture all of the network traffic.
Answer:
The middle node has a data –250. ... Write The Pseudocode To Replace The Middle Node Of The Linked List With ... Assume That The List's Head Pointer Is Called Head_ptr And The Data For The New Node Is Called Entry ... Assume that the list's head pointer is called head_ptr and the data for the new node is called entry ...
Explanation:
Answer:
Here is the script:
function dd = functionDMS(dd)
prompt= 'Enter angle in DD form ';
dd = input(prompt)
while (~checknum(dd))
if ~checknum(dd)
error('Enter valid input ');
end
dd = input(prompt)
end
degrees = int(dd)
minutes = int(dd - degrees)
seconds = ( dd - degrees - minutes / 60 ) * 3600
print degrees
print minutes
print seconds
print dd
Explanation:
The script prompts the user to enter an angle in decimal degree (DD) form. Next it stores that input in dd. The while loop condition checks that input is in valid form. If the input is not valid then it displays the message: Enter valid input. If the input is valid then the program converts the input dd into degrees, minutes and seconds form. In order to compute degrees the whole number part of input value dd is used. In order to compute the minutes, the value of degrees is subtracted from value of dd. The other way is to multiply remaining decimal by 60 and then use whole number part of the answer as minutes. In order to compute seconds subtract dd , degrees and minutes values and divide the answer by 60 and multiply the entire result with 3600. At the end the values of degrees minutes and seconds are printed. In MATLAB there is also a function used to convert decimal degrees to degrees minutes and seconds representation. This function is degrees2dms.
Another method to convert dd into dms is:
data = "Enter value of dd"
dd = input(data)
degrees = fix(dd);
minutes = dd - degrees;
seconds = (dd-degrees-minutes/60) *3600;
Answer:
knowledge acquisition facility
Explanation:
In the context of the components of a typical expert system, Knowledge acquisition facility is defined as that component of an expert system that is responsible for providing an effective and efficient medium for collecting and incorporating relevant information such as data, new rules, relationships and facts used by the expert system.
21
2121212121222 erhfjefbvervjgretg
