Answer:
0.002925 m
Explanation:
Lt = LO(1 +α Δt ) here Lt is total length Lo is original length α is coefficient of linear expansion and Δt is change in temperature
<h2>for aluminium</h2>
α=25×10^-6
Lt = 5(1+25×10^-6×(70-20))
Lt = 5 (1+25×10^-6×50)
Lt = 5 ( 1+0.00125)
Lt = 5×1.00125
Lt =5.00625 m
<h2>for nickel </h2>
α=13.3×10^-6
Lt =5(1+13.3×10^-6×50)
Lt = 5(1+0.000665)
Lt =5.003325 m
hence difference in length =5.00625-5.003325
= 0.002925 m
Find Displacement and Distance
displacement ...
north is 700+400+100 =1200m n
south=1200m
1200-1200=0
east is 300+300=600m
west is 600m
600-600=0
back at dtart. displ zero
distance is 700+ 300m + 400 m + 600m + 1200m + 300m + 100m = 3600m
Answer:
18 times
Explanation:
According to the security purposes which is set under the rules and regulation OSHA, which describes all the rights to the worker.
In the boom hoist receiving system all the sheaves which are used should have a pitch diameter of rope not less than 18 times the diameter of the nominal rope which is used.
Answer:
Explanation:
Given:
<u>the thermal resistance in the form of </u>
where:
are the thickness of the respective bricks
are the respective coefficient of conductivity
temperature inside the house, 
temperature outside the house, 
area of the wall, 
Since the bricks and insulation are used to construct a wall then they must be used in series for better shielding.
<u>Using Fourier's law:</u>
in series the resistances get add up
