Can you wire a new house with a knob and tube?
2 answers:
You might be interested in
Answer:
153.2 J
Explanation:
Let's first list our given parameters;
mass (m) of the block = 10 kg
which slides down ( i.e displacement) = 2 m
kinetic coefficient of friction (μk) = 0.2
In the diagram shown below; if we take an integral look at the component of force in the direction of the displacement; we have
Fcos 40°
100 (cos 40°)
76.60 N
Workdone by the friction force can now be determined as:
W = × displacement
W = 76.60 × 2
W = 153.2 J
∴ the work done by the friction force = 153.2 J
Answer:
- hoop stress
- longitudinal stress
- material used
all this could led to the failure of the garden hose and the tear along the length
Explanation:
For the flow of water to occur in any equipment, water has to flow from a high pressure to a low pressure. considering the pipe, water is flowing at a constant pressure of 30 psi inside the pipe which is assumed to be higher than the allowable operating pressure of the pipe. but the greatest change in pressure will occur at the end of the hose because at that point the water is trying to leave the hose into the atmosphere, therefore the great change in pressure along the length of the hose closest to the end of the hose will cause a tear there. also the other factors that might lead to the failure of the garden hose includes :
hoop stress ( which acts along the circumference of the pipe):
αh = EQUATION 1
and Longitudinal stress ( acting along the length of the pipe )
αl = EQUATION 2
where p = water pressure inside the hose
d = diameter of hose, T = thickness of hose
we can as well attribute the failure of the hose to the material used in making the hose .
assume for a thin cylindrical pipe material used to be
≥ 20
insert this value into equation 1
αh = = 60/2 = 30 psi
the allowable hoop stress was developed by the material which could have also led to the failure of the garden hose