All categories

2 years ago

Which option will you use to expose your presentation to the audience?

Computers and Technology

2 answers:

Liula [17]2 years ago

6 0

Which option will you use to expose your presentation to the audience?
B)Slide Show

White raven [17]2 years ago

5 0

You will use the Slide Show option to expose your presentation to the audience. Correct answer: B

In order to begin a presentation from the current slide you should select the Slide Show view command at the bottom of the PowerPoint window . On the Slide Show menu select Set Up Show or Rehearse Timings.

You might be interested in

A signal travels from point A to point B. At point A, the signal power is 100 W. At point B, the power is 90 W. What is the atte

11Alexandr11 [23.1K]

Answer:

$Attenuation = 0.458\ db$

Explanation:

Given

Power at point A = 100W

Power at point B = 90W

Required

Determine the attenuation in decibels

Attenuation is calculated using the following formula

$Attenuation = 10Log_{10}\frac{P_s}{P_d}$

Where $P_s = Power\ Inpu$ t and $P_d = Power\ outpu$ t

$P_s = 100W$

$P_d = 90W$

Substitute these values in the given formula

$Attenuation = 10Log_{10}\frac{P_s}{P_d}$

$Attenuation = 10Log_{10}\frac{100}{90}$

$Attenuation = 10 * 0.04575749056$

$Attenuation = 0.4575749056$

$Attenuation = 0.458\ db$ (Approximated)

7 0

2 years ago

Suppose a computer has 16-bit instructions. The instruction set consists of 32 different operations. All instructions have an op

Kazeer [188]

Answer:

2^7= 128

Explanation:

An instruction format characterizes the diverse part of a guidance. The fundamental segments of an instruction are opcode and operands. Here are the various terms identified with guidance design: Instruction set size tells the absolute number of guidelines characterized in the processor. Opcode size is the quantity of bits involved by the opcode which is determined by taking log of guidance set size. Operand size is the quantity of bits involved by the operand. Guidance size is determined as total of bits involved by opcode and operands.

6 0

2 years ago

Instead of sending an entire file in one big chunk across the Internet, __________ is used which dices the file up into little

azamat

Answer:

TCP/IP

Explanation:

TCP/IP which stands for Transmission Control Protocol and Internet Protocol are network protocols which divide your message into smaller chunks or fragments known as network packets and sends them out onto the Internet. When the chunks arrive at the intended destination, TCP/IP on the receiving end reassembles the network packets into the original message.

TCP/IP are the main protocols used for sending data over the internet.

7 0

2 years ago

Exponentiation Is a/an operater?

garik1379 [7]

Answer:

Yes it is

Hope this helps

5 0

1 year ago

Pick the correct statements regarding cell references.

shusha [124]

Statement two and three is correct.

Statement 1 is incorrect. A relative reference changes when a formula is copied to another cell while Absolute references remain constant. However, it is safe to say that an absolute address can be preceded by a $ sign before both the row and the column values. It is designated by the addition of a dollar sign either before the column reference, the row reference, or both. Statement C is also correct. A mixed reference is a combination of relative and absolute reference and the formula (= A1 + $B$2) is an example of a mixed cell reference.

7 0

2 years ago

Read 2 more answers