Answer:
Troubleshooting steps to take:
- Restart the tablet
- Restart the projector
Explanation:
When such problems occur, the basic and quick troubleshooting step is to restart the device or devices involved.
- Restart the tablet: This could come in handy regarding this problem. The inability to connect to the projector could be due to the inability of a specific service or driver needed for the projector. Restarting the tablet will load up the drivers and services again to enable smooth connections. When a restart is done, bugs are fixed, internet connection is rectified, memory leaks are stopped, performance is aided, the RAM (Random Access Memory) is flushed or cleaned. This should resolve the problem, however, if not, try number 2.
- Restart the projector: There are driver software on projectors, and due to one system failure or another, these software may fail to load. This could affect its connection to another device. As done in (1), restarting the projector will fix those bugs and load up, which should solve the connection issue.
<span>There is a total of 32 bits in </span>IPv4 address space. In this case we have /24, which means <span>that 24 bits are contained in the network. So, the </span><span>
subnetwork is 192.168.1.64
subnet mask 255.255.255.192</span>
Answer:
I think it’s slide shorter view
Explanation:
The answer & explanation for this question is given in the attachment below.
The answer is user EXEC mode. This is for setting, viewing, and testing system processes. In common, the user EXEC commands let you to link to remote devices, modify terminal line settings on a temporary basis, perform basic tests, and list system information. This also used by common system administrators, while the privileged EXEC mode is used by the root administrator. Use the enable and disable instructions to shift between the two levels. Access to the user-level EXEC command line needs a valid password.
