In a well-designed detail report, a field called a(n) ___

Which feature of Badoo helped members make their profile more prominent?

Tamiku [17]

rise up was correct just finished the test

4 0

2 years ago

Which of the following facts determines how often a nonroot bridge or switch sends an 802.1D STP Hello BPDU message?

irinina [24]

Answer:

b. The Hello timer as configured on the root switch.

Explanation:

There are differrent timers in a switch. The root switch is the only forwarding switch in a network, while non root switches blocks traffic to prevent looping of BPDUs in the network. Since the root switch is the only forwarding switch, all timing configuration comes from or is based on the configuration in the root.

The hello timer is no exception as the nonroot switch only sends 802.1D DTP hello BPDU messages forwarded to it by the root switch and its frequency depends on the root switch hello timer.

8 0

2 years ago

Emma wants to create a website that will contain mostly textual information pertaining to book reports she has to create. Which

Softa [21]

The language that will help her create a website structured in the form of headings and paragraphs of text would be HTML.

7 0

2 years ago

Read 2 more answers

Suppose a host has a 1-MB file that is to be sent to another host. The file takes 1 second of CPU time to compress 50%, or 2 sec

kozerog [31]

Answer: bandwidth = 0.10 MB/s

Explanation:

Given

Total Time = Compression Time + Transmission Time

Transmission Time = RTT + (1 / Bandwidth) xTransferSize

Transmission Time = RTT + (0.50 MB / Bandwidth)

Transfer Size = 0.50 MB

Total Time = Compression Time + RTT + (0.50 MB /Bandwidth)

Total Time = 1 s + RTT + (0.50 MB / Bandwidth)

Compression Time = 1 sec

Situation B:

Total Time = Compression Time + Transmission Time

Transmission Time = RTT + (1 / Bandwidth) xTransferSize

Transmission Time = RTT + (0.40 MB / Bandwidth)

Transfer Size = 0.40 MB

Total Time = Compression Time + RTT + (0.40 MB /Bandwidth)

Total Time = 2 s + RTT + (0.40 MB / Bandwidth)

Compression Time = 2 sec

Setting the total times equal:

1 s + RTT + (0.50 MB / Bandwidth) = 2 s + RTT + (0.40 MB /Bandwidth)

As the equation is simplified, the RTT term drops out(which will be discussed later):

1 s + (0.50 MB / Bandwidth) = 2 s + (0.40 MB /Bandwidth)

Like terms are collected:

(0.50 MB / Bandwidth) - (0.40 MB / Bandwidth) = 2 s - 1s

0.10 MB / Bandwidth = 1 s

Algebra is applied:

0.10 MB / 1 s = Bandwidth

Simplify:

0.10 MB/s = Bandwidth

The bandwidth, at which the two total times are equivalent, is 0.10 MB/s, or 800 kbps.

(2) . Assume the RTT for the network connection is 200 ms.

For situtation 1:

Total Time = Compression Time + RTT + (1/Bandwidth) xTransferSize

Total Time = 1 sec + 0.200 sec + (1 / 0.10 MB/s) x 0.50 MB

Total Time = 1.2 sec + 5 sec

Total Time = 6.2 sec

For situation 2:

Total Time = Compression Time + RTT + (1/Bandwidth) xTransferSize

Total Time = 2 sec + 0.200 sec + (1 / 0.10 MB/s) x 0.40 MB

Total Time = 2.2 sec + 4 sec

Total Time = 6.2 sec

Thus, latency is not a factor.

5 0

2 years ago

One form of competition-based pricing is going-rate pricing, inwhich a firm bases its price largely on competitors' prices, with

Kobotan [32]

Answer:

Out of the four options , the option that is most suitable is

option b. Cost, demand

<u>cost</u> or to <u>demand</u>

Explanation:

Going rate pricing is a form of competition based pricing. This pricing is commonly used for homogeneous products i.e., products with very minute distinction or variation among producers.

This type of pricing is based on setting price on the basis of the prevailing market trends in pricing of goods or services, so, the prices are largely based on the competition in the market rather than considering its own cost and demand.

8 0

2 years ago

In a well-designed detail report, a field called a(n) ____ field controls the output.