answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Vikki [24]
2 years ago
12

In a study comparing banks in Germany and Great Britain, a sample of 145 matched pairs of banks was formed. Each pair contained

one bank from Germany and one from Great Britain. The pairings were made in such a way that the two members were as similar as possible in regards for factors like size and age. The ratio of total loans outstanding to total assets was calculated for each bank. For this ration, the sample mean difference (German – Great Britain) was 0.0518 and the sample standard deviation of the differences was 0.3055. Test, against a two sided alternative, the null hypothesis that the two population means are equal.
Engineering
1 answer:
elena55 [62]2 years ago
5 0

Answer:

The difference between the two population is mean

Explanation:

Let the population mean for Germany and Great Britain be represented by \mu_1 and \mu_2 respectively hence

Null hypothesis

H_o: \mu_1-\mu_2=0

Alternative hypothesis

H_1: \mu_1-\mu_2\neq 0

Taking \alpha=0.05  

s_d=0.3055

\bar d=\bar x-\bar y=0.0518

Sample size, n=145

Student’s t statistics is given by

t=\frac {\bar d \sqrt n}{s_d}=\frac {0.0518\times \sqrt 145}{0.3055}=2.042

From t table, t_{n-1,\alpha/2}=t_{144,0.025}=1.977

The decision rule is to reject null hypothesis if

\frac {\bar d \sqrt n}{s_d}>t_{n-1, \alpha/2}

Therefore, we reject the null hypothesis because the computed t value is more than critical value. We conclude that the difference between the two population is mean.

You might be interested in
Write a method printShampooInstructions(), with int parameter numCycles, and void return type. If numCycles is less than 1, prin
kirill [66]

Answer:

// The method is defined with a void return type

// It takes a parameter of integer called numCycles

// It is declared static so that it can be called from a static method

public static void printShampooInstructions(int numCycles){

// if numCycles is less than 1, it display "Too few"

   if (numCycles < 1){

       System.out.println("Too few.");

   }

// else if numCycles is less than 1, it display "Too many"

    else if (numCycles > 4){

       System.out.println("Too many.");

   }

// else it uses for loop to print the number of times to display

// Lather and rinse

  else {

       for(int i = 1; i <= numCycles; i++){

           System.out.println(i + ": Lather and rinse.");

       }

       System.out.println("Done");

       

   }

}

Explanation:

The code snippet is written in Java. The method is declared static so that it can be called from another static method. It has a return type of void. It takes an integer as parameter.

It display "Too few" if the passed integer is less than 1. Or it display "Too much" if the passed integer is more than 4. Else it uses for loop to display "Lather and rinse" based on the passed integer.

8 0
2 years ago
Natural Convection from an Oven Wall. The oven wall in Example 4.7-1 is insulated so that the surface temperature is 366.5 K ins
lukranit [14]

Answer:

i) Heat transfer coefficient (h) = 7 w/m²k

ii) Heat transfer per meter width of wall

      = h x L x 1 x (Ts - T₆₀)

        = 7 x 0.3048 x (505.4 - 322) = 414.747 w/m

Explanation:

see attached image

8 0
2 years ago
The slope distance and zenith angle between points A and B were measured with a total station instrument as 17685.20 ft and 93°
dimaraw [331]

True

Explanation:

three point bending is better than tensile for evaluating the strength of ceramics. it is got a positive benefit to tensile for evaluating the strength of ceramics.

4 0
2 years ago
print('Predictions are hard.") print(Especially about the future.) user_num = 5 print('user_num is:' user_num)
Bas_tet [7]

Answer:

The correct code is given below:-

print("Predictions are hard.")

print("Especially about the future.")

user_num = 5

print("user_num is:", user_num)

7 0
2 years ago
A 60-cm-high, 40-cm-diameter cylindrical water tank is being transported on a level road. The highest acceleration anticipated i
dlinn [17]

Answer:

h_{max} = 51.8 cm

Explanation:

given data:

height of tank = 60cm

diameter of tank =40cm

accelration = 4 m/s2

suppose x- axis - direction of motion

z -axis - vertical direction

\theta = water surface angle with horizontal surface

a_x =accelration in x direction

a_z =accelration in z direction

slope in xz plane is

tan\theta = \frac{a_x}{g +a_z}

tan\theta = \frac{4}{9.81+0}

tan\theta =0.4077

the maximum height of water surface at mid of inclination is

\Delta h = \frac{d}{2} tan\theta

            =\frac{0.4}{2}0.4077

\Delta h  0.082 cm

the maximu height of wwater to avoid spilling is

h_{max} = h_{tank} -\Delta h

            = 60 - 8.2

h_{max} = 51.8 cm

the height requird if no spill water is h_{max} = 51.8 cm

3 0
2 years ago
Other questions:
  • Define a) Principal Plane b) Principal Stress c) anelasticity d) yield point e) ultimate tensile stress f) hardness g) toughness
    5·1 answer
  • Which of the following is NOT true about hydraulic valves? A. Directional control valves determine the path of a fluid in a give
    10·1 answer
  • When should you exercise extreme caution around power lines?
    6·1 answer
  • The 2-Mg concrete pipe has a center of mass at point G. If it is suspended from cables AB and AC, determine the diameter of cabl
    12·1 answer
  • Let Deterministic Quicksort be the non-randomized Quicksort which takes the first element as a pivot, using the partition routin
    13·1 answer
  • A vineyard owner is planting several new rows of grapevines, and needs to know how many grapevines to plant in each row. She has
    8·1 answer
  • Determine the angular acceleration of the uniform disk if (a) the rotational inertia of the disk is ignored and (b) the inertia
    11·1 answer
  • Complete the following sentence.
    5·1 answer
  • The extruder head in a fused- deposition modeling setup has a diameter of 1.25 mm (0.05 in) and produces layers that are 0.25mm
    8·1 answer
  • If you have power steering and you are able to __________, you should have your vehicle checked out by a qualified technician.
    7·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!