answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
viktelen [127]
2 years ago
5

A steady, incompressible, two-dimensional velocity field is given by the following components in the x-y plane: u=1.85+2.05x+0.6

56y v=0.754−2.18x−2.05y . Calculate the acceleration field (find expressions for acceleration components ax and ay), and calculate the acceleration at the point (x,y) = (-1, 4). The acceleration components are ax = + x ay = + y Acceleration components at (-1, 4) are ax = ay =
Engineering
1 answer:
AnnZ [28]2 years ago
7 0

Answer:

\frac{du}{dt} = 1.515

\frac{dv}{dt} = 5.511

Explanation:

The acceleration field is obtained by deriving the components in function of the time. That is to say:

\frac{du}{dt}=2.05\cdot \frac{dx}{dt}+0.656\cdot \frac{dy}{dt}\\\frac{dv}{dt} = -2.18\cdot \frac{dx}{dt} -2.05\cdot \frac{dy}{dt}

Where \frac{dx}{dt} = u and \frac{dy}{dt} = v.

The velocity components at given point are, respectively:

u = 2.424

v=-5.266

Lastly, the acceleration components are found:

\frac{du}{dt} = 1.515

\frac{dv}{dt} = 5.511

You might be interested in
Q10. Select the correct option for the following questions – (10 points, 2 each) a. After an edge dislocation has passed through
Gnom [1K]

Answer:

a. True - Because the atomic arrangements of that region is disorderer because of the extra half plane atoms in between the line

b.Slip

C. Strength theoretical is greater than strength experimental

d. Shear stress

e. Highest linear density

4 0
2 years ago
The rectangular frame is composed of four perimeter two-force members and two cables AC and BD which are incapable of supporting
Rama09 [41]

Answer:

Your question is lacking some information attached is the missing part and the solution

A) AB = AD = BD = 0, BC = LC

    AC = \frac{5L}{3}T, CD = \frac{4L}{3} C

B) AB = AD = BC = BD = 0

   AC = \frac{5L}{3} T, CD = \frac{4L}{3} C

Explanation:

A) Forces in all members due to the load L in position A

assuming that BD goes slack from an inspection of Joint B

AB = 0 and BC = LC from Joint D, AD = 0 and CD = 4L/3 C

B) steps to arrive to the answer is attached below

AB = AD = BC = BD = 0

AC = \frac{5L}{3} T,  CD = \frac{4L}{3}C

7 0
2 years ago
A liquid with a specific gravity of 2.6 and a viscosity of 2.0 cP flows through a smooth pipe of unknown diameter, resulting in
sasho [114]
.......,.,.,.,.,.,,.,.,,.,.,.,.,.,.,.,,.,.,,.,,,.,,.,,.,.,.,.,,............,,,,,,’mmdjidvdhxxkf jkkk he in d
6 0
2 years ago
An annealed copper strip of 228 mm wide and 25 mm thick being rolled to a thickness of 20 mm, in one pass. The roll radius is 30
sdas [7]

Answer:

The roll force is 1.59 MN

The power required in this operation is 644.96 kW

Explanation:

Given;

width of the annealed copper, w = 228 m

thickness of the copper, h₀ = 25 mm

final thickness, hf = 20 mm

roll radius, R = 300 mm

The roll force is given by;

F = LwY_{avg}

where;

w is the width of the annealed copper

Y_{avg} is average true stress of the strip in the roll gap

L is length of arc in contact, and for frictionless situation it is given as;

L = \sqrt{R(h_o-h_f)} \\\\L = \sqrt{300(25-20)}\\\\L = 38.73 \ mm

Now, determine the average true stress, Y_{avg}, for the annealed copper;

The absolute value of the true strain, ε = ln(25/20)

ε = 0.223

from true stress vs true strain graph; at true strain of 0.223, the true stress is 280 MPa.

Then, the average true stress = ¹/₂(280 MPa.) = 180 MPa

Finally determine the roll force;

F = LwY_{avg}

F = (\frac{38.73 }{1000})(\frac{228}{1000})*180 \ MPa\\\\F =   1.59 \ MN

The power required in this operation is given by;

P = \frac{2\pi FLN}{60}\\\\P =  \frac{2\pi (1.59*10^6)(0.03873)(100)}{60}\\\\P = 644955.2 \ W\\\\P = 644.96 \ kW

5 0
2 years ago
If you have power steering and you are able to __________, you should have your vehicle checked out by a qualified technician.
svp [43]

Answer: drive

Explanation:

The best word that would fit this sentence is drive. A vehicle owner should know how to drive, and they can get their vehicle checked by a qualified technician. The best word that would fit this sentence is drive. If you have power steering and you are able to <u>drive</u>, you should have your vehicle checked by a qualified technician.

8 0
2 years ago
Other questions:
  • Air is compressed adiabatically from p1 1 bar, T1 300 K to p2 15 bar, v2 0.1227 m3 /kg. The air is then cooled at constant volum
    13·1 answer
  • Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 1 bar. Steam enters
    6·1 answer
  • A gas pressure difference is applied to the legs of a U-tube manometer filled with a liquid with specific gravity of 1.7. The ma
    15·2 answers
  • The in situ moist unit weight of a soil is 17.3 kN/m3 and the moisture content is 16%. The specific gravity of soil solids is 2.
    12·1 answer
  • The procedure for determining the presence of Non-Condensable Gasses in refrigerant contained in an external recovery tank utili
    5·2 answers
  • The device whose operation closely matches the way the clamp-on ammeter works is
    14·1 answer
  • A glycerin pump is powered by a 5-kW electric motor. The pressure differential between the outlet and the inlet of the pump at f
    13·1 answer
  • An ideal Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine the maximum air temperature and the rat
    9·1 answer
  • Technician A says that weld-through primer can be removed from the immediate weld area to improve weld quality. Technician B say
    7·1 answer
  • What is the component called that usually has a dual-voltage selector switch and has cables that connect to the motherboard and
    15·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!