The driving force for fluid flow is the pressure difference, and a pump operates by raising the pressure of a fluid (by converti
1 answer:
You might be interested in
Answer:
b). The same for all pipes independent of the diameter
Explanation:
We know,
From the above formulas we can conclude that the thermal resistance of a substance mainly depends upon heat transfer coefficient,whereas radius has negligible effects on heat transfer coefficient.
We also know,
Factors on which thermal resistance of insulation depends are :
1. Thickness of the insulation
2. Thermal conductivity of the insulating material.
Therefore from above observation we can conclude that the thermal resistance of the insulation is same for all pipes independent of diameter.
Answer:
a)σ₁ = 265.2 MPa
b)σ₂ = -172.8 MPa
c)
d)Range = 438 MPa
Explanation:
Given that
Mean stress ,σm= 46.2 MPa
Stress amplitude ,σa= 219 MPa
Lets take
Maximum stress level = σ₁
Minimum stress level =σ₂
The mean stress given as
2 x 46.2 = σ₁ + σ₂
σ₁ + σ₂ = 92.4 MPa --------1
The amplitude stress given as
2 x 219 = σ₁ - σ₂
σ₁ - σ₂ = 438 MPa --------2
By adding the above equation
2 σ₁ = 530.4
σ₁ = 265.2 MPa
-σ₂ = 438 -265.2 MPa
σ₂ = -172.8 MPa
Stress ratio
Range = 265.2 MPa - ( -172.8 MPa)
Range = 438 MPa
Answer:
a)Wt =25.68 lbf
b)Wt = 150 lbf
F= 899.59 N
Explanation:
Given that
m= 150 lbm
a)
Weight on the spring scale(Wt) = m g
We know that
Wt = 150 x 5.48/32 lbf
Wt =25.68 lbf
b)
On the beam scale
This is scale which does not affects by gravitational acceleration.So the wight on the beam scale will be 150 lbf.
Wt = 150 lbf
If the plane is moving upward with acceleration 6 g's then the for F
F = m a
We know that
a=6 g's
So
F = 90 x 9.99 N
F= 899.59 N