Ask question

Ask question

All categories

2 years ago

15

35.0 mL of acid with an unknown concentration is titrated with 24.6 mL of 0.432 M base. What is the concentration of the acid? A

ssume the acid contributes 1 mole of (H+) ions/mole of acid and the base contributes 1 mole of (OH-) ions/mole of base.
a)3.29 M
b)0.615 M
c)0.304 M

1 answer:

photoshop1234 [79]2 years ago

8 0

Since we assume both reactants have 1 equivalent of H+ and OH- ions, we can balance the moles out. The acid of concentration x will have (x M)(0.035 L) = 0.035x moles of acid. Meanwhile, for the base: (0.432 M)(0.0246 L) = 0.0106 moles of base. Since these must be equivalent:
0.035x = 0.0106x = 0.304 M

You might be interested in

5. To keep your lunch cold at the beach, would you want a material

Leya [2.2K]

Answer:

Minimizes heat transfer

Explanation:

To keep my lunch from getting cold at the beach, a material the minimizes heat transfer will be the most desirable.

Such material should be modified to prevent had transfer by convection, conduction and radiation.
This kind of material is desirable because heat generally flows from a place of high amount to that of low amount.
Since the food will mostly have a temperature higher than the ambient one, it is expected that heat will flow away from the food to the environment.
This will make the food cold.
If such heat transfer is prevented, then, the food will remain hot.

4 0

2 years ago

The unit cell for cr2o3 has hexagonal symmetry with lattice parameters a = 0.4961 nm and c = 1.360 nm. If the density of this ma

IRINA_888 [86]

To calculate the packing factor, first calculate the area and volume of unit cell.

Area is calculated as:

$A=6R^{2}\sqrt{3}$

Here, R is radius and is related to a as follows:

$R=\frac{a}{2}$

Putting the value in expression for area,

$A=6(\frac{a}{2})^{2}\sqrt{3}=1.5a^{2}\sqrt{3}$

The value of a is 0.4961 nm

Since, $1 nm=10^{-7}cm$

Thus, $0.4961 nm=4.961\times 10^{-8} cm$

Putting the value,

$Area=1.5(4.961\times 10^{-8}cm)^{2}\sqrt{3}=6.39\times 10^{-15}cm^{2}$

Now, volume can be calculated as follows:

$V=Area\times c$

The value of c is 1.360 nm or $1.360\times 10^{-7} cm$

Putting the value,

$V=(6.39\times 10^{-15}cm^{2})\times (1.360\times 10^{-7} cm)=8.7\times 10^{-22}cm^{3}$

now, number of atom in unit cell can be calculated by using the following formula:

$n=\frac{\rho N_{A}V_{c}}{A}$

Here, A is atomic mass of $Cr_{2}O_{3}$ is 151.99 g/mol.

Putting all the values,

$n=\frac{(5.22 g/cm^{3})(6.023\times 10^{23} mol^{-1})(8.7\times 10^{-22}cm^{3})}{(151.99 g/mol)}\approx 18$

Thus, there will be 18 $Cr_{2}O_{3}$ units in 1 unit cell.

Since, there are 2 Cr atoms and 3 oxygen atoms thus, units of chromium and oxygen will be 2×18=36 and 3×18=54 respectively.

The atomic radii of $Cr^{3+}$ and $O^{2-}$ is 62 pm and 140 pm respectively.

Converting them into cm:

$1 pm=10^{-10}cm$

Thus,

$r_{Cr^{3+}}=6.2\times 10^{-9}cm$

and,

$r_{O^{2-}}=1.4\times 10^{-8}cm$

Volume of sphere will be sum of volume of total number of cations and anions thus,

$V_{S}=V_{Cr^{3+}}+V_{O^{2-}}$

Since, volume of sphere is $V=\frac{4}{3}\pi r^{3}$ ,

$V_{S}=36\left ( \frac{4}{3}\pi (r_{Cr^{3+})^{3}} \right )+54\left ( \frac{4}{3}\pi (r_{O^{2-})^{3}} \right )$

Putting the values,

$V_{S}=36\left ( \frac{4}{3}(3.14) (6.2\times 10^{-9} cm)^{3}} \right )+54\left ( \frac{4}{3}(3.14) (1.4\times 10^{-8} cm)^{3}} \right )=6.6\times 10^{-22}\times 10^{-8}cm^{3}$

The atomic packing factor is ratio of volume of sphere and volume of crystal, thus,

$packing factor=\frac{V_{S}}{V_{C}}=\frac{6.6\times 10^{-22}cm^{3}}{8.7\times 10^{-22}cm^{3}}=0.758$

Thus, atomic packing factor is 0.758.

6 0

2 years ago

Read 2 more answers

An experiment was conducted to measure the effect of equal amounts of fertilizer on the growth of bean plants and corn plants. T

ss7ja [257]

Answer:

b

Explanation:

3 0

2 years ago

Read 2 more answers

If a 0.4856 gram sample of khp is dissolved in sufficient water to prepare 250 ml of solution, and 25 ml of the solution require

dangina [55]

Mass of potassium hydrogen pthalate KHP is 0.4856 g, its molar mass is 204.22 g/mol, number of moles of KHP can be calculated as follows:

$n=\frac{m}{M}$

Here, m is mass and M is molar mass, putting the values,

$n=\frac{0.4856 g}{204.22 g/mol}=0.00237 mol$

This will be number of moles of NaOH at equivalent point.

Detailed calculations:

Molarity is defined as number of moles in 1 L of solution, for 250 mL of solution, molarity will be:

$M=\frac{0.00237 mol}{250 \times 10^{-3}L}=0.009511 M$

For 25 mL, apply dilution law as follows:

$M_{1}V_{1}=M_{2}V_{2}$

Putting the values,

$0.009511\times 250=M_{2}\times 25 mL$

On rearranging,

$M_{2}=\frac{0.009511\times 250}{25}=0.09511 M$

Convert molarity into number of moles,

$n=M\times V=0.09511 mol/L\times 25\times 10^{-3}L=0.00237 mol$

At equivalent point, number of moles of KHP will be equal to NaOH, thus, number of moles of NaOH will be 0.00237 mol.

Calculation for molarity:

Volume of NaOH is 18.75 mL, thus, molarity can be calculated as follows:

$M=\frac{n}{V}$

Putting the values,

$M=\frac{0.00237 mol}{18.75\times 10^{-3}L}=0.1264 M$

Therefore, molarity of NaOH is 0.1264 M

7 0

2 years ago

LOOK AT THE IMAGE ABOVE CAN SOMEONE PLEASE HELP ME AND SHOW FULL STEPS PLEASE

Tju [1.3M]

answer:

no

explanation:

cause you dumb

5 0

2 years ago