Answer:
B) hyperbolic curve; saturated with substrate
Explanation:
Enzymatic kinetics studies the speed of enzyme catalyzed reactions. These studies provide direct information about the mechanism of the catalytic reaction and the specificity of the enzyme. The speed of a reaction catalyzed by an enzyme can be measured with relative ease, since in many cases it is not necessary to purify or isolate the enzyme. The measurement is always carried out under the optimal conditions of pH, temperature, presence of cofactors, etc., and saturating substrate concentrations are used. Under these conditions, the reaction rate observed is the maximum speed (Vmax). The speed can be determined either by measuring the appearance of the products or the disappearance of the reagents.
Following the rate of appearance of product (or disappearance of the substrate) as a function of time, the so-called reaction progress curve is obtained, or simply, the reaction kinetics. This curve is represented by a hyperbolic curve
Answer:
There are 3 steps of this problem.
Explanation:
Step 1.
Wet steam at 1100 kPa expands at constant enthalpy to 101.33 kPa, where its temperature is 105°C.
Step 2.
Enthalpy of saturated liquid Haq = 781.124 J/g
Enthalpy of saturated vapour Hvap = 2779.7 J/g
Enthalpy of steam at 101.33 kPa and 105°C is H2= 2686.1 J/g
Step 3.
In constant enthalpy process, H1=H2 which means inlet enthalpy is equal to outlet enthalpy
So, H1=H2
H2= (1-x)Haq+XHvap.........1
Putting the values in 1
2686.1(J/g) = {(1-x)x 781.124(J/g)} + {X x 2779.7 (J/g)}
= 781.124 (J/g) - x781.124 (J/g) = x2779.7 (J/g)
1904.976 (J/g) = x1998.576 (J/g)
x = 1904.976 (J/g)/1998.576 (J/g)
x = 0.953
So, the quality of the wet steam is 0.953
Answer:
Explanation:
Given that:
the temperature 
= 250 °C= ( 250+ 273.15 ) K = 523.15 K
Pressure = 1800 kPa
a)
The truncated viral equation is expressed as:
where; B = - 
C = -5800 
R = 8.314 × 10³ cm³ kPa. K⁻¹.mol⁻¹
Plugging all our values; we have
Multiplying through with V² ; we have
V = 2250.06 cm³ mol⁻¹
Z = 
Z = 
Z = 0.931
b) The truncated virial equation [Eq. (3.36)], with a value of B from the generalized Pitzer correlation [Eqs. (3.58)–(3.62)].
The generalized Pitzer correlation is :
The compressibility is calculated as:
Z = 0.9386
V = 2268.01 cm³ mol⁻¹
c) From the steam tables (App. E).
At 
V = 0.1249 m³/ kg
M (molecular weight) = 18.015 gm/mol
V = 0.1249 × 10³ × 18.015
V = 2250.07 cm³/mol⁻¹
R = 729.77 J/kg.K
Z =
Z = 
Z = 0.588
Answer : Option 3) Wave/Particle duality.
Explanation : The experiment on discovery of photoelectric effect revealed about the photoelectrons of light that can behave as particle or waves.
The photoelectric effect is observed when the emission of electrons or other free carriers occurs on shining a light radiation on a material. The electrons emitted from this can be called photo electrons. These photoelectrons may behave as wave or particle in duality which holds that light and matter exhibit properties of both waves and of particles.
The pH of a buffer solution : 4.3
<h3>Further explanation</h3>
Given
0.2 mole HCNO
0.8 mole NaCNO
1 L solution
Required
pH buffer
Solution
Acid buffer solutions consist of weak acids HCNO and their salts NaCNO.
![\tt \displaystyle [H^+]=Ka\times\frac{mole\:weak\:acid}{mole\:salt\times valence}](https://tex.z-dn.net/?f=%5Ctt%20%5Cdisplaystyle%20%5BH%5E%2B%5D%3DKa%5Ctimes%5Cfrac%7Bmole%5C%3Aweak%5C%3Aacid%7D%7Bmole%5C%3Asalt%5Ctimes%20valence%7D)
valence according to the amount of salt anion
Input the value :
![\tt \displaystyle [H^+]=2.10^{-4}\times\frac{0.2}{0.8\times 1}\\\\(H^+]=5\times 10^{-5}\\\\pH=5-log~5\\\\pH=4.3](https://tex.z-dn.net/?f=%5Ctt%20%5Cdisplaystyle%20%5BH%5E%2B%5D%3D2.10%5E%7B-4%7D%5Ctimes%5Cfrac%7B0.2%7D%7B0.8%5Ctimes%201%7D%5C%5C%5C%5C%28H%5E%2B%5D%3D5%5Ctimes%2010%5E%7B-5%7D%5C%5C%5C%5CpH%3D5-log~5%5C%5C%5C%5CpH%3D4.3)
