Steam enters a turbine operating at steady state at 1 MPa, 200 °C and exits at 40 °C with a quality of 83%. Stray heat transfer
1 answer:
Answer:
(a) Work out put=692.83
(b) Change in specific entropy=0.0044
Explanation:
Properties of steam at 1 MPa and 200°C
We know that if we know only one property in side the dome then we will find the other property by using steam property table.
Given that dryness or quality of steam at the exit of turbine is 0.83 and temperature T=40°C.So from steam table we can find pressure corresponding to saturation temperature 40°C.
Properties of saturated steam at 40°C
So the enthalpy of steam at the exit of turbine
(a)
Work out put =
=2827.4-2134.57
Work out put =692.83
(b) Change in specific entropy
Change in specific entropy =0.0044
You might be interested in
Answer:
The overall Utility delivered to customers in a year 'U' = 6.25 X 10¹⁰Kwh
However, the average power P, required for a year, t = ? Kw
Expressing their relationship, we will have
U = P x t
Given t = 1 year = 24 x 365 hours (assume a year operation is 365 days)
t = 8760 hours
P =
P = 7134.7Kw
Hence, the average power required during the year is 7,135Kw
Now to calculate the energy used by the power plant in a year (in quads)?
Recall, Efficiency, η = Power Output/Power Input (100)
so, we have
η = P₀/P₁, given
0.45 =
P₁ = 15,855Kw
the total energy E₁ used in a year = 15,855x24x365 = 138.89MJoules
So to convert this to quads, Note;
1 quads of energy = 10¹⁵ Joules
The total energy used is 0.000000139 quads
Now to find the cubic feet of natural gas required to generate this power?
Note: 0.29Kwh of Power generated = 1 cubic feet of natural gas used
Since, the power plant generated = 62500000000Kwh
The cubic feet of natural gas used =
Hence, 2.155x10²⁰cubic feet of N.gas was used to generate this much power.
Answer:
Explanation:
Given data:
flow rate = 10 gallon per minute = 0.0223 ft^3/sec
diameter = 0.75 inch
we know discharge is given as
Q = VA
solve for velocity V = \frac{Q}{A}[/tex]
V = 7.27 ft/sec
we know that Reynold number
calculate the ratio to determine the fanning friction f
from moody diagram f value corresonding to Re and is 0.037
for horizontal pipe
where 1.94 slug/ft^3is density of water
Answer:
Here is the JAVA program:
import java.util.Scanner; // to get input from user
public class DrawHalfArrow{ // start of the class half arrow
public static void main(String[] args) { // starts of main() function body
Scanner scnr = new Scanner(System.in); //reads input
int arrowBaseHeight = 0; // stores the height of arrow base
int arrowBaseWidth = 0; // holds width of arrow base
int arrowHeadWidth = 0; // contains the width of arrow head
// prompts the user to enter arrow base height, width and arrow head width
System.out.println("Enter arrow base height: ");
arrowBaseHeight = scnr.nextInt(); // scans and reads the input as int
System.out.println("Enter arrow base width: ");
arrowBaseWidth = scnr.nextInt();
/* while loop to continue asking user for an arrow head width until the value entered is greater than the value of arrow base width */
while (arrowHeadWidth <= arrowBaseWidth) {
System.out.println("Enter arrow head width: ");
arrowHeadWidth = scnr.nextInt(); }
//start of the nested loop
//outer loop iterates a number of times equal to the height of the arrow base
for (int i = 0; i < arrowBaseHeight; i++) {
//inner loop prints the stars asterisks
for (int j = 0; j <arrowBaseWidth; j++) {
System.out.print("*"); } //displays stars
System.out.println(); }
//temporary variable to hold arrowhead width value
int k = arrowHeadWidth;
//outer loop to iterate no of times equal to the height of the arrow head
for (int i = 1; i <= arrowHeadWidth; i++)
{ for(int j = k; j > 0; j--) {//inner loop to print stars
System.out.print("*"); } //displays stars
k = k - 1;
System.out.println(); } } } // continues to add more asterisks for new line
Explanation:
The program asks to enter the height of the arrow base, width of the arrow base and the width of arrow head. When asking to enter the width of the arrow head, a condition is checked that the arrow head width arrowHeadWidth should be less than or equal to width of arrow base arrowBaseWidth. The while loop keeps iterating until the user enters the arrow head width larger than the value of arrow base width.
The loop is used to output an arrow base of height arrowBaseHeight. So point (1) is satisfied.
The nested loop is being used which as a whole outputs an arrow base of width arrowBaseWidth. The inner loop draws the stars and forms the base width of the arrow, and the outer loop iterates a number of times equal to the height of the arrow. So (2) is satisfied.
A temporary variable k is used to hold the original value of arrowHeadWidth so that it keeps safe when modification is done.
The last nested loop is used to output an arrow head of width arrowHeadWidth. The inner loop forms the arrow head and prints the stars needed to form an arrow head. So (3) is satisfied.
The value of temporary variable k is decreased by 1 so the next time it enters the nested for loop it will be one asterisk lesser.
The screenshot of output is attached.
