answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
7nadin3 [17]
2 years ago
14

It is said that Archimedes discovered his principle during a bath while thinking about how he could determine if King Hiero’s cr

own was actually made of pure gold. While in the bathtub, he conceived the idea that he could determine the average density of an irregularly shaped object by weighing it in air and also in water. If the crown weighed 34.7 N in air and 31.5 N in water, determine if the crown is made of pure gold. The density of gold is 19,300 kg/m3. The density of water is 1000 kg/m3.
Engineering
1 answer:
arlik [135]2 years ago
3 0

Answer: The crown is not made of pure gold.

Explanation:

Archimedes discovered that any solid, of any shape, when submerged in a liquid receives an upward force, equal to the weight of the volume of the liquid removed by the solid, which is equal to the solid volume.

So, if any body is weighed in air, the normal force will be equal to the gravity force (which we call weight) which can be expressed as follows:

Fg = m g = δ V g = 34.7 N

When submerged in water, the normal force is equal to the difference between the actual weight, and the upward force due to Archimedes' principle, called buoyant force, as follows:

Fn = Fg - Ep = δx. V. g - δH20 . V. g = 31.5 N

Dividing Fg between Fn, and simplifying common terms, we have:

δx / (δx - δh20) = 34.7 / 31.5 = 1.10

Solving for δx, we get the following value:

δx = 11,000 Kg/m3, less dense than pure gold, so we can conclude that the crown was not made of pure gold.

You might be interested in
John was a high school teacher earning $ 80,000 per year. He quit his job to start his own business in pizza catering. In order
Anton [14]

Answer:

John should continue with his catering business because accounting and economic profits from pizza catering are more than his annual salary from teaching.

Explanation:

John can earn from teaching $80,000 annually

For starting business of pizza catering John will incur following expense

Tuition for catering skills $2,000

Opportunity cost for withdrew of funds ($110,000 * 5%) $5,500

Interest for Borrowing from friend ($50,000 * 6%) $3,000

Opportunity cost of Rent from premises $12,000

Total opportunity cost $22,500

Revenue:

Revenues from Pizza $400,000

Revenue from Beverages $190,000

Total revenue $590,000

Expenses:

Cashier wages ($55,000 * 2) $110,000

Pizza ingredients $50,000

Manager salary $75,000

Pizza bakers wages ($60,000 * 3) $180,000

Equipment $10,000

Total Expense $425,000

Net Income - Accounting Profit ($590,000 - $425,000) = $165,000

Less opportunity cost $22,500

Economic Profit $142,500

4 0
2 years ago
A well-insulated tank in a vapor power plant operates at steady state. Saturated liquid water enters at inlet 1 at a rate of 125
kompoz [17]

Answer:

a. The mass flow rate (in lbm/s) is 135lbm/s

b. The temperature (in o F) is 200.8°F

Explanation:

We assume that potential energy and kinetic energy are negligible and the control volume operates at a steady state.

Given

a. The mass flow rate (in lbm/s) is 135lbm/s

b.

m1 = Rate at inlet 1 = 125lbm/s

m2 = Rate at inlet 2 = 10lbm/s

The mass flow rate (in lbm/s) is calculated as m1 + m2

Mass flow rate = 125lbm/s + 10lbm/s

Mass flow rate = 135lbm/s

Hence, the mass flow rate (in lbm/s) is 135lbm/s

b. To calculate the temperature.

First we need to determine the enthalpy h1 at 14.7psia

Using table A-3E (thermodynamics)

h1 = 180.15 Btu/Ibm

h2 at 14.7psia and 60°F = 28.08 Btu/Ibm

Calculating h3 using the following formula

h3 = (h1m1 + h2m2) / M3

h3 = (180.15 * 125 + 28.08 * 10)/135

h3 = 168.8855555555555

h3 = 168.89 Btu/Ibm

To get the final temperature; we make use of table A-2E of thermodynamics.

Because h3 < h1, it means the liquid is at a compressed state.

The corresponding temperature at h3 = 168.89 is 200.8°F

The temperature (in o F) is 200.8°F

6 0
2 years ago
Link BD consists of a single bar 36 mm wide and 18 mm thick. Knowing that each pin has a 12-mm diameter, determine the maximum v
MAXImum [283]

Answer:

hello the diagram attached to your question is missing attached below is the missing diagram

answer :

a) 48.11 MPa

b) - 55.55 MPa

Explanation:

First we consider the equilibrium moments about point A

∑ Ma = 0

( Fbd * 300cos30° ) + ( 24sin∅ * 450cos30° ) - ( 24cos∅ * 450sin30° ) = 0

therefore ;<em> Fbd = 36 ( cos ∅tan30° - sin∅ ) kN  ----- ( 1 )</em>

A ) when ∅ = 0

Fbd = 20.7846 kN

link BD will be under tension when ∅ = 0, hence we will calculate the loading area using this equation

A = ( b - d ) t

b = 12 mm

d = 36 mm

t = 18

therefore loading area ( A ) = 432 mm^2

determine the maximum value of average normal stress in link BD  using the relation below

бbd = \frac{Fbd}{A}  = 20.7846 kN / 432 mm^2  =  48.11 MPa

b) when ∅ = 90°

Fbd = -36 kN

the negativity indicate that the loading direction is in contrast to the assumed direction of loading

There is compression in link BD

next we have to calculate the loading area using this equation ;

A = b * t

b = 36mm

t = 18mm

hence loading area = 36 * 18 = 648 mm^2

determine the maximum value of average normal stress in link BD  using the relation below

бbd = \frac{Fbd}{A} = -36 kN / 648mm^2 = -55.55 MPa

4 0
1 year ago
Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA
weqwewe [10]
OSHA inspections are generally unannounced. In fact, except in four exceptional circumstances when advance notice may be given.


It is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection.
5 0
2 years ago
Chapter 19: Diesel Engine Operation and Diagnosis -Chapter Quiz
Llana [10]

Answer: See explanation

Explanation:

1. How is diesel fuel ignited in a warm diesel engine?

B. Heat compression

2. Which type of diesel injection produces less noise?

A. Indirect injection (IDI)

3. Which diesel injection system requires the use of a glow plug?

A. Indirect injection (IDI)

4. The three phases of diesel ignition include:

C. Ignition delay, repaid combustion, controlled combustion.

5. What fuel system component is used in a vehicle equipped with a diesel engine that is seldom used on the same vehicle when it is equipped with a gasoline engine?

D. Water-fuel separator

6. The diesel injection pump is usually driven by a _________________.

A. Gear off the camshaft

7. Which diesel system supplies high-pressure diesel fuel to all the injectors all of the time?

C. High-pressure common rail

8. Glow plugs should have high resistance when _____________and lower resistance when __________________.

B. Warm/cold

9. Technician A says that glow plugs are used to help start a diesel engine and are shut off as soon as the engine starts. Technician B says that the glow plugs are turned off as soon as a flame is detected in the combustion chamber. Which Technician is correct?

D. Neither Technicians A NOR B

10. What part should be removed to test cylinder compression on a diesel engine?

D. A glow plug

6 0
2 years ago
Other questions:
  • Oil in an engine is being cooled by air in a cross-flow heat exchanger, where both fluids are unmixed. Oil (cp = 2000 J/kg. K) f
    12·1 answer
  • Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially t
    9·1 answer
  • 6.8.1: Function pass by pointer: Transforming coordinates. Define a function CoordTransform() that transforms its first two inpu
    9·1 answer
  • With thermodynamics, one cannot determine ________.
    14·1 answer
  • Oil enters a counterflow heat exchanger at 600 K with a mass flow rate of 10 kg/s and exits at 200 K. A separate stream of liqui
    12·1 answer
  • An equation used to evaluate vacuum filtration is Q = ΔpA2 α(VRw + ARf) , Where Q ≐ L3/T is the filtrate volume flow rate, Δp ≐
    13·1 answer
  • A rectangular beam having b=300 mm and d=575 mm, spans 5.5 m face to face of simple supports. It is reinforced for flexure with
    14·1 answer
  • What are some goals of NYFEA? Select three options.
    9·2 answers
  • A dryer is shaped like a long semi-cylindrical duct of diameter 1.5 m. The base of the dryer is occupied with water-soaked mater
    9·1 answer
  • A surface grinding operation is used to finish a flat plate that is 5.50 in wide and 12.500 in long. The starting thickness is 1
    9·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!