Answer:
3. Choosing a pre-formatted presentation (that already has a design in the slides) is called choosing a ?
Explanation:
3. Choosing a pre-formatted presentation (that already has a design in the slides) is called choosing a ?
Answer:
Category 5 (Cat 5) twisted pair is the least quality twisted pair wire that should be used.
Explanation:
The reason is as follows:
- Category 1 twisted pair is not suitable for transmitting data but comes in handy for telephone communications. Hence, it should not be used in a data/voice application.
- Category 2 twisted pair is suitable for data transmission, however, it can only transmit at 4Mbps which is very slow. Hence, it should not be used in a data/voice application.
- Category 3 twisted pair can transmit data with speed reaching 10Mbps which is slow for voice/data communication.
- Category 4 twisted pair can transmit data with speed reaching 16Mbps and is used in token ring networks. It is slow for communicating in a voice/data application.
- Category 5 twisted pair is the least qualified to be used in a voice/data application because it can transmit data at speeds that reach 100Mbps.
Hence, Cat 5 or Category 5 twisted pair is the least quality twisted pair that should be used in a data/voice application.
Answer:
The Proper codes in Line a and Line b is given below
average=Sum/3
print (" Average is = ", average)
Explanation:
In the given question it calculated the sum but the program does not calculate the average of the 3 numbers.The average of the 3 number is calculated by using average=Sum/3 statement so we add this code in Line a then After that print the value of average by using the print function so we add this code in Line b.
Answer:
subnets=65536
Explanation:
As we know that,
-->interface ID portion of address starts from 64
--> we have 48 network prefix
so
available bits for subnet are = 64-48= 16
so with 16 bit address we can create subnet = 2^16 = 65535
Answer:
The output is:
R
M
N
Explanation:
The code snippet print the beginning letter of each word in the given name.
In the for loop snippet:
first the program check if startWord is true and it is true, then it print the value of the character at index 0. Then it check if value of character is empty. If it is empty, startWord is initialized to true else it is initialized to false.
The loop only print a character when the value of i are 0, 8 and 11 which are also the beginning character of a word.
