answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Lorico [155]
2 years ago
7

An uncharged series RC circuit is to be connected across a battery. For each of the following changes, determine whether the tim

e for the capacitor to reach 90% of its final charge would increase, decrease, or remain unchanged. Indicate your answers with "I," "D," or "U," respectively. (a) The RC time constant t is doubled. (b) The battery voltage is doubled. (c) A second resistor is added in series with the original resistor.
Physics
1 answer:
slavikrds [6]2 years ago
8 0

a) Increase

b) Unchanged

c) Increase

Explanation:

a)

The charge on a capacitor charging in a RC circuit connected to a battery follows the exponential equation:

Q(t)=Q_0 (1-e^{-\frac{t}{RC}})

where

Q_0 = CV is the final charge stored in the capacitor, where C is the capacitance and V is the voltage of the battery

t is the time

R is the resistance of the circuit

The capacitor reaches 90% of its final charge when

Q(t)=0.90Q_0

Substituting and re-arranging the equation, we find:

0.90Q_0 = Q_0(1-e^{-\frac{t}{RC}})\\0.90=1-e^{-\frac{t}{RC}}\\e^{-\frac{t}{RC}}=0.10\\-\frac{t}{RC}=ln(0.10)\\t=-RCln(0.10)=2.30RC

We see that if we double the RC constant, then (RC)'=2(RC)

So the time taken will double as well:

t'=2.30(RC)'=2.30(2RC)=2(2.30RC)=2t

So, the answer is "increase"

b)

In this second part, the battery voltage is doubled.

According to the equation written in part a),

Q_0 =CV

this means also that the final charge stored on the capacitor will also double.

However, the equation that gives us the time needed for the capacitor to reach 90% of its full charge is

t=2.30 RC

We see that this equation does not depend at all on the voltage of the battery.

Therefore, if the battery voltage is doubled, the final charge on the capacitor will double as well, but the time needed for the capacitor to reach 90% of its charge will not change.

So the correct answer is

"unchanged"

c)

In this case, a second resistor is added in series with the original resistor of the circuit.

We know that for two resistors in series, the total resistance of the circuit is given by the sum of the individual resistances:

R=R_1+R_2

Since each resistance is a positive value, this means that as we add new resistors, the total resistance of the circuit increases.

Therefore in this problem, if we add a resistor in series to the original circuit, this means that the total resistance of the circuit will increase.

The time taken for the capacitor to reach 90% of its final charge is still

t=2.30 RC

As we can see, this time is directly proportional to the resistance of the circuit, R: therefore, if we add a resistor in series, the resistance of the circuit will increase, and therefore this time will increase as well.

So the correct answer is

"increase"

You might be interested in
If you touch the two terminals of a power supply with your two fingertips on opposite hands, the potential difference will produ
LiRa [457]

Answer:

Yes the body will receive a dangerous shock in both cases.

Explanation:

Different parts of the body has different resistance. skin has the high resistance as compared to other organs of the body.

Dry skin has high resistance than wet skin this is because water is relatively good conductor of electricity, it adds parallel path to the current flow and hence reduces skin resistance.

Dry hands body has approximately 500 kΩ resistance and if 120 V electricity supply current received will be:

I = V/R= 120/ 500*10^3

I= 0.24 mA

Even the current seems is much lower than the safe zone but this is the case in case of DC voltage in case of AC voltage the body will receive a shock this is because the skin pass more current when the voltage is changing i.e. AC.

Similarly for wet hands body resistance is 1 kΩ. so the current through the body seems to be:

I = 120 / 1000

I = 12 mA

The current is higher than safe zone so the body will receive a dangerous shock.

7 0
2 years ago
A charge of uniform volume density (40 nC/m3) fills a cube with 8.0-cm edges. What is the total electric flux through the surfac
GREYUIT [131]

Answer:

The flux through the surface of the cube is 2.314\ Nm^{2}/C

Solution:

As per the question:

Edge of the cube, a = 8.0 cm = 8.0\times 10^{- 2}\ m

Volume Charge density, \rho_{v} = 40 nC/m^{3} = 40\times {- 9}\ C/m^{3}

Now,

To calculate the electric flux:

\phi = \frac{q}{\epsilon_{o}}                                                      (1)

where

\phi = electric flux

\epsilon_{o} = 8.85\times 10^{- 12}\ F/m = permittivity of free space  

Volume Charge density for the given case is given by the formula:

\rho_{v} = \frac{Total\ charge, q}{Volume of cube, V}                  (2)

Volume of cube, V = a^{3}

Thus

V = (8.0\times 10^{- 2})^{3} = 5.12\times 10^{- 4}\ m^{3}

Thus from eqn (2), the total charge is given by:

q = \rho_{v}V = 40\times {- 9}\times 5.12\times 10^{- 4}

q = 2.048\times 10^{-11}\ F = 20.48\ pF

Now, substitute the value of 'q' in eqn (1):

\phi = \frac{2.048\times 10^{-11}}{8.85\times 10^{- 12}} = 2.314\ Nm^{2}/C

5 0
2 years ago
An object travels 50 m in 4 s. It had no initial velocity and experiences constant acceleration. What is the magnitude of the ac
Allisa [31]

Answer:

The formula to calculate velocity in this case:

v = v0 + at

=> a = (v - v0)/t

       = (50 - 0)/4

       = 50/4 = 12.5 (m/s2)

Hope this helps!

:)

3 0
2 years ago
Calculate the applied force of the washers on the car. First, convert the mass you recorded for one, two, three, and four washer
Andrej [43]

The mass of one washer is  0.0049 kg.

The mass of two washers is  0.0098 kg.

The mass of three washers is  0.0147 kg.

The mass of four washers is  0.0196 kg.

3 0
2 years ago
Read 2 more answers
6. Starting from 1.5 miles away, a car drives toward a speed checkpoint and then passes it. The car travels at a constant rate o
loris [4]
For the answer to the question above, 

<span>To be 0.1 miles away from the check point ,
 the car has to travel 1.4 miles OR 1.6 miles. </span>


53 miles = 60 minutes 

1.4 miles = 1.4 / 53 X 60 = 1.5849056 minutes OR 95.1 seconds 

<span>1.6 miles = 1.6 /53 X 60 = 1.8113207 minutes OR 108.7 seconds 
</span>So the answer is <span>95.1s and 108.7s
I hope my answer helped you</span>
7 0
2 years ago
Other questions:
  • A 1200-kilogram space vehicle travels at 4.8 meters per second along the level surface of Mars. If the magnitude of the gravitat
    8·2 answers
  • Select all that apply. Greenhouse gases _____. absorb solar energy absorb carbon dioxide release carbon dioxide are released dur
    7·1 answer
  • A 0.180-kilogram cart traveling at 0.80 meter per second to the right collides with a 0.100-kilogram cart initially at rest. The
    13·1 answer
  • An object is located 13.5 cm in front of a convex mirror, the image being 7.05 cm behind the mirror. A second object, twice as t
    11·1 answer
  • As a youngster, you drive a nail in the trunk of a young tree that is 3 meters tall. The nail is about 1.5 meters from the groun
    9·1 answer
  • What is the magnitude of the force needed to hold the outer 2 cm of the blade to the inner portion of the blade?
    14·1 answer
  • A solid plate, with a thickness of 15 cm and a thermal conductivity of 80 W/m·K, is being cooled at the upper surface by air. Th
    5·1 answer
  • A new technology company is marketing drones for residential use. The bar graph shows the relation between number of sales and t
    12·1 answer
  • In a particular application involving airflow over a surface, the boundary layer temperature distribution may be approximated as
    15·1 answer
  • A rock falls for 1.43 seconds how far did it fall? The falls's velocity is an acceleration of -9.81 m/s2
    13·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!