answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Leya [2.2K]
2 years ago
5

(a) If 5 x 10^17 phosphorus atoms per cm3 are add to silicon as a substitutional impurity, determine the percentage of silicon a

toms per unit volume that are displaced in the single crystal lattice.
(b) Repeat part (a) for 2 x 10^15 boron atoms per cm3 added to silicon.
Engineering
1 answer:
Y_Kistochka [10]2 years ago
7 0

Answer:

The percentage of silicon atoms per unit volume that are displaced in the single crystal lattice = 0.001 %

The percentage of silicon atoms per unit volume that are displaced in the single crystal lattice with boron atoms = 0.4 ×10^{-5} %

Explanation:

No. of phosphorus atoms = 5 × 10^{17} \ cm^{-3}

The volume occupied by a single Si atom

V_{si} = \frac{a^{3} }{8}

V_{si} = \frac{5.43^{3}(10^{-8} )^{3}  }{8}

V_{si} = 2 × 10^{-23} \frac{cm^{3} }{atom}

n_{si} = \frac{1}{V_{si} }

n_{si} = 5 × 10^{22} \frac{atoms}{cm^{3} }

PCT = \frac{N_p}{N_{si}}   100

Put the values in above equation we get

PCT = \frac{5 (10^{17} )}{5 (10^{22}) } 100

PCT = 10^{-3} = 0.001 %

These are the percentage of silicon atoms per unit volume that are displaced in the single crystal lattice.

(b).

No. of boron atoms = 2 × 10^{15} \ cm^{-3}

The volume occupied by a single Si atom

V_{si} = \frac{a^{3} }{8}

V_{si} = \frac{5.43^{3}(10^{-8} )^{3}  }{8}

V_{si} = 2 × 10^{-23} \frac{cm^{3} }{atom}

n_{si} = \frac{1}{V_{si} }

n_{si} = 5 × 10^{22} \frac{atoms}{cm^{3} }

PCT = \frac{N_p}{N_{si}}   100

Put the values in above equation we get

PCT = \frac{2 (10^{15} )}{5 (10^{22}) } 100

PCT = 0.4 ×10^{-5} %

These are the percentage of silicon atoms per unit volume that are displaced in the single crystal lattice.

You might be interested in
A six- lane freeway ( three lanes in each direction) in a scenic area has a measured free- flow speed of 55 mi/ h. The peak- hou
Novosadov [1.4K]

Answer:

0.867

Explanation:

The driver population factor (f_{p})can be estimated using the equation below:

f_{p} = \frac{V}{PHF*N*f_{HV}*v_{p}}

The value of the heavy vehicle factor (f_{HV}) is determined below:

The values of the E_{T} = 2 and E_{R} = 3 are gotten from the tables for the RVs, trucks and buses upgrades for passenger-car equivalents. Therefore:

f_{HV} = 1/[1+0.08(2-1)+0.06(3-1)] = 1/[1+0.08+0.12] = 1/1.2 = 0.833

Furthermore, the vp is taken as 2250 pc/(h*In) from the table of LOS criteria for lane freeway using the 15 minutes flow rate. Therefore:

f_{p} = 3900/[0.8*3*0.833*2250] = 3900/4498.2 = 0.867

6 0
2 years ago
If water molecules pass through a membrane with a steady state flux of 220 mole/(m2 day), how long will it take, in hours, for 0
goblinko [34]

Answer:

<em>0.0386 hr</em>

<em></em>

Explanation:

Area = 565 cm^2 = 0.0565 m^2  (1 cm^2 = 0.0001 m^2)

flux state rate = 220 mole/m^2-day

<em>There are 24 hrs in a day,</em> therefore rate in hrs will be

220/24 = 9.17 mole/m^2-hr

mass of water = 0.4 kg

molar mass of water = (1 x 2) + 16 = 18 kg/mole

therefore,

<em>mole of water = mass of water/molar mass of water</em>

mole of water = 0.4/18 = 0.02 mole

<em>mole flux = mole/area</em> = 0.02/0.0565 = 0.354 mol/m^2

<em>time that will be taken will be for water to pass = mole flux/mole flux rate</em>

time = 0.354/9.17 = <em>0.0386 hr</em>

7 0
2 years ago
An overpass is being built over the PVI of an existing equal-tangent sag curve. The sag curve has a 70 mi/h design speed and G1=
vivado [14]

Answer: Resultant elevation will be 30.98 ft

8 0
2 years ago
Which of these is true about airbag charts?
Arlecino [84]
A should be it or b
4 0
2 years ago
A suspension of Bacillus subtilis cells is filtered under constant pressure for recovery of protease. A pilot-scale filter is us
sattari [20]

The answer & explanation for this question is given in the attachment below.

7 0
2 years ago
Other questions:
  • Mary is interested in developing new machines that would increase the productivity of small scale farmers. After high school, wh
    8·1 answer
  • A circular ceramic plate that can be modeled as a blackbody is being heated by an electrical heater. The plate is 30 cm in diame
    15·1 answer
  • A pitfall cited in Section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of th
    6·1 answer
  • Python Homework
    12·1 answer
  • The atomic radii of a divalent cation and a monovalent anion are 0.77 nm and 0.136 nm, respectively.1- Calculate the force of at
    11·1 answer
  • A spherical tank for storing gas under pressure is 25 m in diameter and is made of steel 15 mm thick. The yield point of the mat
    5·2 answers
  • A shaft consisting of a steel tube of 50-mm outer diameter is to transmit 100 kW of power while rotating at a frequency of 34 Hz
    7·1 answer
  • A distância entre duas retas reversas é a medida de um segmento orientado que *?
    6·1 answer
  • A spring-loaded toy gun is used to shoot a ball of mass m = 1.50 kg straight up in the air. The spring has spring constant k = 6
    13·1 answer
  • Test if a number grade is an A (greater than or equal to 90). If so, print "Great!". Hint: Grades may be decimals. Sample Run En
    15·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!