answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Juliette [100K]
2 years ago
13

A Carnot heat engine receives heat from a reservoir at 900oC at a rate of 800 kJ/min and rejects the waste heat to the ambient a

ir at 27oC. The entire work output of the heat engine is used to drive a refrigerator that removes heat from the refrigerated space at -5oC and transfers it to the same ambient air at 27oC. Determine (a) the maximum rate of heat removal from the refrigerated space and (b) the total rate of heat rejection to the ambient air.
Engineering
1 answer:
leonid [27]2 years ago
0 0

Answer:

a) \dot Q_{L} = 4987.776\,\frac{kJ}{min}, b) \dot Q = 5787.776\,\frac{kJ}{min}

Explanation:

a) The efficiency of the Carnot heat engine is:

\eta_{th} = \left(1-\frac{T_{L}}{T_{H}} \right)\times 100\,\%

\eta_{th} = \left(1-\frac{300.15\,K}{1173.15\,K} \right)\times 100\,\%

\eta_{th} = 74.415\,\%

The power output used to drive the refrigerator is:

\dot W = (0.744)\cdot \left(800\,\frac{kJ}{min}\right)\cdot \left(\frac{1}{60}\,\frac{min}{s} \right)

\dot W = 9.92\,kW

The coefficient of performance of the refrigerator is:

COP_{R} = \frac{T_{L}}{T_{H}-T_{L}}

COP_{R} = \frac{268.15\,K}{300.15\,K-268.15\,K}

COP_{R} = 8.380

The heat removal from the refrigerated space is:

\dot Q_{L} = \dot W\cdot COP_{R}

\dot Q_{L} = (9.92\,kW)\cdot \left(60\,\frac{s}{min} \right)\cdot (8.380)

\dot Q_{L} = 4987.776\,\frac{kJ}{min}

b) The heat rejected from the Carnot heat engine to the ambient air is:

\dot Q_{L} = (1-0.744)\cdot \left(800\,\frac{kJ}{min} \right)

\dot Q_{L} = 204.8\,\frac{kJ}{min}

Now, the heat rejected from the refrigerator to the ambient air is:

\dot Q_{H} = \dot W + \dot Q_{L}

\dot Q_{H} = (9.92\,kW)\cdot (60\,\frac{s}{min} ) + 4987.776\,\frac{kJ}{min}

\dot Q_{H} = 5582.976\,\frac{kJ}{min}

Finally, the total rate of heat rejection to the ambient air is:

\dot Q = 5582.976\,\frac{kJ}{min} + 204.8\,\frac{kJ}{min}

\dot Q = 5787.776\,\frac{kJ}{min}

You might be interested in
How does Accenture generate value for clients through Agile and DevOps?
Nana76 [90]
By permanently locking in stakeholder requirements during a project's planning phase. -through highly detailed process documentation that is updated following every work cycle.
7 0
1 year ago
Read 2 more answers
A closed system consisting of 4 lb of a gas undergoes a process during which the relation between pressure and volume is pVn 5 c
gayaneshka [121]

Answer:

V1=5<u>ft3</u>

<u>V2=2ft3</u>

n=1.377

Explanation:

PART A:

the volume of each state is obtained by multiplying the mass by the specific volume in each state

V=volume

v=especific volume

m=mass

V=mv

state 1

V1=m.v1

V1=4lb*1.25ft3/lb=5<u>ft3</u>

state 2

V2=m.v2

V2=4lb*0.5ft3/lb=  <u> 2ft3</u>

PART B:

since the PV ^ n is constant we can equal the equations of state 1 and state 2

P1V1^n=P2V2^n

P1/P2=(V2/V1)^n

ln(P1/P2)=n . ln (V2/V1)

n=ln(P1/P2)/ ln (V2/V1)

n=ln(15/53)/ ln (2/5)

n=1.377

3 0
2 years ago
A pair of spur gears with 20 degree pressure angle, full-depth, involute teeth transmits 65 hp. The pinion is mounted on a shaft
vfiekz [6]

Answer:

See explaination

Explanation:

a) The pitch circle diameter of pinion in inches is given by

Dp=Np/P

Where

Np= No. of teeth in pinion = 26

P =diametral pitch= 6

Hence

Dp= 26/6 = 4.333 in

Pinion angular speed\omega _{p} =1250 rpm = 130.9 rad/s

Therefore pitch line speed

V=Dp/2\omega _{p} = 4.333/2x130.9

= 283.62 in/s

V= 23.63 ft/s

V=1418 ft/min

b) The pitch circle diameter og gear is given by

Dg= Ng/P= 48/6 = 8 in

The center distance is given by

C=(Dp+Dg)/2

= (4.333+8)/2

C= 6.167 in

c) The torque on the pinion is given by

Tp= P/\omega _{p}

Where

P = transmitted power, =65 hp = 65x550= 35750 lt-lb/s

Tp= 35750/130.9

= 273.1 ft-lb

d) Speed ratio is given as

R=Ng/Np= 48/26 = 1.8461

Hence speed of gear is

\omega _{g}=\frac{\omega _{p}}{R}

= 130.9/1.8461

= 70.9 rad/s

Therefore torque on gear is given as

Tg= P/\omega _{g} = 35750/70.9

= 504.2 ft-lb

e) Assuming transmission eficiency of 100%

Output hp=input hp= 65 hp

f) Tangential force on gear teeth is given by

Fgt= Tg/(Dg/2)

= 504.2x2/8

= 126.05 lb

g) Radial force on ger teeth is given as

Fgr= Fgt tan\phi

Where

\phi is pressure angle = 200

Hence

Fgr= 126.05tan200

= 45.88 lb

h) The normal force on gear teeth is given as

F=Fgt/cos\phi

= 126.05/cos200

= 134.14 lb

4 0
2 years ago
The top 3 most popular male names of 2017 are Oliver, Declan, and Henry according to babynames. Write a program that modifies th
Flura [38]

Answer:

The code is given below in Python with appropriate comments

Explanation:

# convert list to set

male_names = set(['Oliver','Declan','Henry'])

# get remove and add name from user

remove_name = input("Enter remove name: ")

add_name = input("Enter add name: ")

# remove name from set

male_names.remove(remove_name)

# add new name ij set

male_names.add(add_name)

# sort the set

a = sorted(male_names)

# print the set

print(a)

7 0
2 years ago
A 0.2-m^3 rigid tank equipped with a pressure regulator contains steam at 2MPa and 320C. The steam in the tank is now heated. Th
prohojiy [21]

Answer:

Q=486.49 KJ/kg

Explanation:

Given that

V= 0.2 m³

At initial condition

P= 2 MPa

T=320 °C

Final condition

P= 2 MPa

T=540°C

From steam table

At P= 2 MPa and T=320 °C

h₁=3070.15 KJ/kg

At P= 2 MPa and T=540°C

h₂=3556.64  KJ/kg

So the heat transfer ,Q=h₂ - h₁

Q= 3556.64 - 3070.15  KJ/kg

Q=486.49 KJ/kg

7 0
2 years ago
Other questions:
  • A circular ceramic plate that can be modeled as a blackbody is being heated by an electrical heater. The plate is 30 cm in diame
    15·1 answer
  • At a certain college, 30% of the students major in engineering, 20% play club sports, and 10% both major in engineering and play
    14·1 answer
  • Suggest how any sorting algorithm can be augmented in a way to make the best-case count of its key comparisons equal to just n−1
    6·1 answer
  • Sea water with a density of 1025 kg/m3 flows steadily through a pump at 0.21 m3 /s. The pump inlet is 0.25 m in diameter. At the
    8·1 answer
  • Technician A says that the most efficient method of EVAP system leak detection is introducing smoke under low pressure from a ma
    7·1 answer
  • The atomic radii of a divalent cation and a monovalent anion are 0.77 nm and 0.136 nm, respectively.1- Calculate the force of at
    11·1 answer
  • The device whose operation closely matches the way the clamp-on ammeter works is
    14·1 answer
  • An equation used to evaluate vacuum filtration is Q = ΔpA2 α(VRw + ARf) , Where Q ≐ L3/T is the filtrate volume flow rate, Δp ≐
    13·1 answer
  • George is replacing a burned out resistor in a circuit board. The board has a 10, a 20, and a 40 on resistor, all in parallel. W
    5·1 answer
  • What term describes a guardrail system
    13·2 answers
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!