Ask question

Ask question

All categories

2 years ago

6

A 3-phase, 50 Hz, 110 KV overhead line has conductors placed in a horizontal plane 3 m apart. Conductor diameter is 2.5 cm. If t

he line length is 220 km, determine the charging current per phase assuming complete transposition. (6 Marks)

1 answer:

Bas_tet [7]2 years ago

6 0

Answer:

A 3-phase, 50 Hz, 110 KV overhead line has conductors

Explanation:

hope it will helps you

You might be interested in

6.28 A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions 4 ft from the right

dimulka [17.4K]

Answer:

Assume Base free flow speed (BFFS) = 70 mph

Lane width = 10 ft

Reduction in speed corresponding to lane width, fLW = 6.6 mph

Lateral Clearance = 4 ft

Reduction in speed corresponding to lateral clearance, fLC = 0.8 mph

Interchanges/Ramps = 9/ 6 miles = 1.5 /mile

Reduction in speed corresponding to Interchanges/ramps, fID = 5 mph

No. of lanes = 3

Reduction in speed corresponding to number of lanes, fN = 3 mph

Free Flow Speed (FFS) = BFFS – fLW – fLC – fN – fID = 70 – 6.6 – 0.8 – 3 – 5 = 54.6 mph

Peak Flow, V = 2000 veh/hr

Peak 15-min flow = 600 veh

Peak-hour factor = 2000/ (4*600) = 0.83

Trucks and Buses = 12 %

RVs = 6 %

Rolling Terrain

fHV = 1/ (1 + 0.12 (2.5-1) + 0.06 (2.0-1)) = 1/1.24 = 0.806

fP = 1.0

Peak Flow Rate, Vp = V / (PHV*n*fHV*fP) = 2000/ (0.83*3*0.806*1.0) = 996.54 ~ 997 veh/hr/ln

Vp < (3400 – 30 FFS)

S = FFS

S = 54.6 mph

Density = Vp/S = (997) / (54.6) = 18.26 veh/mi/ln

7 0

2 years ago

Develop a preliminary work breakdown structure (WBS) for a small one-story commercial building to be constructed on the site of

Zielflug [23.3K]

Answer:

The preliminary work breakdown structure will be divided into two steps, the first is to draw the first level and the second is to draw the second level.

Explanation:

Please look at attachment.

6 0

2 years ago

Read 2 more answers

Derive the probability that a receptor is occupied by a ligand using a model that treats the L ligands in solution as distinguis

love history [14]

that is the same thing as you are not going through this week or something

7 0

2 years ago

Which of these is true about airbag charts?

Arlecino [84]

A should be it or b

4 0

2 years ago

At steady state, a reversible refrigeration cycle discharges energy at the rate QH to a hot reservoir at temperature TH, while r

ludmilkaskok [199]

Answer:

a) $COP_{R} = 25.014$ , b) $T_{H} = 327.78\,K\,(54.63\,^{\textdegree}C)$

Explanation:

a) The coefficient of performance of a reversible refrigeration cycle is:

$COP_{R} = \frac{T_{L}}{T_{H}-T_{L}}$

Temperatures must be written on absolute scales (Kelvin for SI units, Rankine for Imperial units)

$COP_{R} = \frac{275.15\,K}{286.15\,K-275.15\,K}$

$COP_{R} = 25.014$

b) The respective coefficient of performance is determined:

$COP_{R} = \frac{Q_{L}}{Q_{H}-Q_{L}}$

$COP_{R} = \frac{8.75\,kW}{10.5\,kW-8.75\,kW}$

$COP_{R} = 5$

But:

$COP_{R} = \frac{T_{L}}{T_{H}-T_{L}}$

The temperature at hot reservoir is found with some algebraic help:

$COP_{R} \cdot (T_{H}-T_{L})=T_{L}$

$T_{H}-T_{L} = \frac{T_{L}}{COP_{R}}$

$T_{H} = T_{L}\cdot \left(1+\frac{1}{COP_{R}} \right)$

$T_{H} = 273.15\,K \cdot \left(1+\frac{1}{5} \right)$

$T_{H} = 327.78\,K\,(54.63\,^{\textdegree}C)$

8 0

2 years ago

Read 2 more answers