answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Kisachek [45]
2 years ago
14

The BARO sensor informs the PCM about changes in weather and ____________________.

Engineering
1 answer:
Tom [10]2 years ago
5 0
B. Altitude

The barometric sensor reads the barometric pressure (the density of the atmosphere according to altitude and weather conditions)
You might be interested in
simple power system consists of a dc generator connected to a load center via a transmission line. The load power is 100 kW. The
Roman55 [17]

Answer:

A. ) 591.7 v

B.) 991.7v

C.) 59.7%

D.) 47.9 Kw

E.) 247925 W

F.) 59.7 %

Explanation:

Given that a simple power system consists of a dc generator connected to a load center via a transmission line. The load power is 100 kW. The transmission line is 100 km copper wire of 3 cm diameter. If the voltage at the load side is 400 V,

Let first calculate the resistance in the wire.

The resistivity (rho) of a copper wire is 1.673×10^-8 ohm metres

Resistance R =( L× rho)/A

Where Area = πr^2 = π × 0.015^2

Area = 0.00071 m^2

R = (100000 × 1.673×10^-8) / 0.00071

Resistance in wire = 2.367 ohms

Then let calculate the resistance in the load.

Also, since Power P = V^2 /R

Make R the subject of formula

R = V^2/ P

R = 400^2/100000

Resistance in load = 1.6 Ohms

Current l = V / R

I = 400/1.6 = 250 Ampere

a.) Voltage drop across the line V line will be achieved by using Ohms law.

V = I R

V = 250 × 2.367

V = 591.7 v

B.) Voltage at the source side Vsource will be

V = V line + V load

V = 400 + 591.7

V = 991.7 v

C.) Percentage of the voltage drop Vline /Vsource

591.7/991.7 × 100 = 59.7%

D.) Line losses

P = I V

P = 250 × 591.7

P = 147925 W

Power loss = 147925 - 100000

Power loss = 47,925 W

Power loss = 47.9 Kw

E.) Power delivered by the source

P = IV

P = 250 × 991.7 = 247925 W

F.) System efficiency

Efficiency = power line / power source × 100

Efficiency = 147925 / 247925 × 100

Efficiency = 59.7 %

5 0
2 years ago
When leveraging Artificial Intelligence (AI) in today's business landscape, which statement represents the data leveraged for so
adoni [48]

Answer:

Some AI could end up taking the jobs of many humans.

Explanation:

Their intelligence exponentially grows and human intelligence grows gradually, causing more ideas and better work efficiency from AI.

8 0
2 years ago
At an impaired driver checkpoint, the time required to conduct the impairment test varies (according to an exponential distribut
professor190 [17]

Answer:

Option (d) 2 min/veh

Explanation:

Data provided in the question:

Average time required = 60 seconds

Therefore,

The maximum capacity that can be accommodated on the system, μ = 60 veh/hr

Average Arrival rate, λ = 30 vehicles per hour

Now,

The average time spent by the vehicle is given as

⇒ \frac{1}{\mu(1-\frac{\lambda}{\mu})}

thus,

on substituting the respective values, we get

Average time spent by the vehicle = \frac{1}{60(1-\frac{30}{60})}

or

Average time spent by the vehicle = \frac{1}{60(1-0.5)}

or

Average time spent by the vehicle = \frac{1}{60(0.5)}

or

Average time spent by the vehicle = \frac{1}{30} hr/veh

or

Average time spent by the vehicle = \frac{1}{30}\times60 min/veh

[ 1 hour = 60 minutes]

thus,

Average time spent by the vehicle = 2 min/veh

Hence,

Option (d) 2 min/veh

7 0
2 years ago
Derive the probability that a receptor is occupied by a ligand using a model that treats the L ligands in solution as distinguis
love history [14]

that is the same thing as you are not going through this week or something

7 0
2 years ago
All of these are true about GMA (MIG) welding EXCEPT that:
Hatshy [7]

Answer:

the welding gun liner regulates the shielding gas.

Explanation:

The purpose of the welding gun liner is to properly position the welding wire from the wire feeder till it gets to the nozzle or contact tip of the gun. <em>Regulation of the shielding gas depends on factors such as the speed, current, and type of gas being used. </em>In gas metal arc welding, an electric arc is used to generate heat which melts both the electrode and the workpiece or base metal.

The electric arc produced is shielded from contamination by the shielding gas. The heat generated by the short electric arc is low.

3 0
1 year ago
Other questions:
  • Theorems of Pappus and Guldinus are used to find: a. The surface area and volume of a body of rotation b. The surface area and v
    14·1 answer
  • A 0.2-m^3 rigid tank equipped with a pressure regulator contains steam at 2MPa and 320C. The steam in the tank is now heated. Th
    9·1 answer
  • Gina is about to use a fire extinguisher on a small fire. What factor determines the type of extinguisher she should use
    9·2 answers
  • A ________ is only achieved through control and involves a specific change in one event (dependent variable) that can reliably b
    5·1 answer
  • A pitfall cited in Section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of th
    6·1 answer
  • The Gill Art Gallery wishes to maintain data on their customers, artists and paintings. They may have several paintings by each
    7·1 answer
  • An ideal Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine the maximum air temperature and the rat
    9·1 answer
  • Why is it so dangerous to use a ground lift on a metal cased power tool
    6·1 answer
  • The BARO sensor informs the PCM about changes in weather and ____________________.
    14·1 answer
  • A dryer is shaped like a long semi-cylindrical duct of diameter 1.5 m. The base of the dryer is occupied with water-soaked mater
    9·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!