Where would you expect to find tension?

Odległość między kolejnymi grzbietami fal na morzu wynosi 20 m. Łódź opada z grzbietu fali, unosi się i osiąga ponownie najwyższ

Veronika [31]

Answer:

Explanation:

The distance between successive wave crests at sea is 20 m. The boat descends from the crest of the wave, rises and reaches the highest position again within 5 s. Calculate the wave propagation speed.

Given that,

The distance between two successive crest is 20m

Wavelength is the distance between two successive crest or trough

Then, it's wavelength is λ = 20m

The time to reached the maximum height is 5seconds, then it will take (5×4) to complete one period

Then,

Period T = 20seconds

From wave equation

v = fλ

Where

v is speed

f is frequency and

λ is wavelength

The frequency is related to the period

f = 1 / T

Then,

v = λ / T

So, v = 20 / 20

v = 1 m/s

The speed of propagation of the wave is 1m/s

To Polish

Jeśli się uwzględni,

Odległość między dwoma kolejnymi grzebieniami wynosi 20 m

Długość fali to odległość między dwoma kolejnymi grzebieniami lub dolinami

Zatem jego długość fali wynosi λ = 20 m

Czas do osiągnięcia maksymalnej wysokości wynosi 5 sekund, a następnie ukończenie jednego okresu zajmie (5 × 4)

Następnie,

Okres T = 20 sekund

Z równania falowego

v = fλ

Gdzie

v to prędkość

f oznacza częstotliwość, a

λ jest długością fali

Częstotliwość jest związana z okresem

f = 1 / T

Następnie,

v = λ / T

Zatem v = 20/20

v = 1 m / s

Prędkość propagacji fali wynosi 1m/s

6 0

2 years ago

Hurryyyyyy When using the right-hand rule to determine the direction of the magnetic force on a charge, which part of the hand p

masya89 [10]

When using the right-hand rule to determine the direction of the magnetic force on a charge, which part of the hand points in the direction that the charge is moving? The answer is thumb.

One way to remember this is that there is one velocity, represented accordingly by the thumb. There are many field lines, represented accordingly by the fingers. The force is in the direction you would push with your palm. The force on a negative charge is in exactly the opposite direction to that on a positive charge. Because the force is always perpendicular to the velocity vector, a pure magnetic field will not accelerate a charged particle in a single direction, however will produce circular or helical motion (a concept explored in more detail in future sections). It is important to note that magnetic field will not exert a force on a static electric charge. These two observations are in keeping with the rule that magnetic fields do no work.

6 0

2 years ago

Read 2 more answers

The boom hoisting sheave must have pitch diameters of no less than _______times the nominal diameter of the rope used.

alexira [117]

Answer:

18 times

Explanation:

According to the security purposes which is set under the rules and regulation OSHA, which describes all the rights to the worker.

In the boom hoist receiving system all the sheaves which are used should have a pitch diameter of rope not less than 18 times the diameter of the nominal rope which is used.

7 0

2 years ago

3. A large crane lifts a 25,000 kg mass in the air. The amount of work that must be done by the

andreev551 [17]

$\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}$

Actually Welcome to the concept of Efficiency.

Here we can see that, the Input work is given as 2.2 x 10^7 J and the efficiency is given as 22%

The efficiency is => 22% => 22/100.

so we get as,

E = W(output) /W(input)

hence, W(output) = E x W(input)

so we get as,

W(output) = (22/100) x 2.2 x 10^7

=> W(output) = 0.22 x 2.2 x 10^7 => 0.484 x 10^7

hence, W(output) = 4.84 x 10^6 J

The useful work done on the mass is 4.84 x 10^6 J

5 0

2 years ago

A very long uniform line of charge has charge per unit length λ1 = 4.80 μC/m and lies along the x-axis. A second long uniform li

Elodia [21]

Answer:

a) E=228391.8 N/C

b) E=-59345.91N/C

Explanation:

You can use Gauss law to find the net electric field produced by both line of charges.

$\int \vec{E_1}\cdot d\vec{r}=\frac{\lambda_1}{\epsilon_o}\\\\E_1(2\pi r)=\frac{\lambda_1}{\epsilon_o}\\\\E_1=\frac{\lambda_1}{2\pi \epsilon_o r_1}\\\\\int \vec{E_2}\cdot d\vec{r}=\frac{\lambda_2}{\epsilon_o}\\\\E_2=\frac{\lambda_2}{2\pi \epsilon_o r_2}$

Where E1 and E2 are the electric field generated at a distance of r1 and r2 respectively from the line of charges.

The net electric field at point r will be:

$E=E_1+E_2=\frac{1}{2\pi \epsilon_o}(\frac{\lambda_1}{r_1}+\frac{\lambda_2}{r_2})$

a) for y=0.200m, r1=0.200m and r2=0.200m:

$E=\frac{1}{2\pi(8.85*10^{-12}C^2/Nm^2)}[\frac{4.80*10^{-6}C}{0.200m}-\frac{2.26*10^{-6}C}{0.200m}}]=228391.8N/C$

b) for y=0.600m, r1=0.600m, r2=0.200m:

$E=\frac{1}{2\pi(8.85*10^{-12}C^2/Nm^2)}[\frac{4.80*10^{-6}C}{0.600m}-\frac{2.26*10^{-6}C}{0.200m}}]=-59345.91N/C$

5 0

2 years ago