answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Sidana [21]
2 years ago
8

A 2.0-kg block sliding on a rough horizontal surface is attached to one end of a horizontal spring (k = 250 N/m) which has its o

ther end fixed. The block passes through the equilibrium position with a speed of 2.6 m/s and first comes to rest at a displacement of 0.20 m from equilibrium. What is the coefficient of kinetic friction between the block and the horizontal surface?
Physics
1 answer:
Burka [1]2 years ago
4 0

Suppose the spring begins in a compressed state, so that the block speeds up from rest to 2.6 m/s as it passes through the equilibrium point, and so that when it first comes to a stop, the spring is stretched 0.20 m.

There are two forces performing work on the block: the restoring force of the spring and kinetic friction.

By the work-energy theorem, the total work done on the block between the equilbrium point and the 0.20 m mark is equal to the block's change in kinetic energy:

W_{\rm total}=\Delta K

or

W_{\rm friction}+W_{\rm spring}=0-K=-K

where <em>K</em> is the block's kinetic energy at the equilibrium point,

K=\dfrac12\left(2.0\,\mathrm{kg}\right)\left(2.6\dfrac{\rm m}{\rm s}\right)^2=6.76\,\mathrm J

Both the work done by the spring and by friction are negative because these forces point in the direction opposite the block's displacement. The work done by the spring on the block as it reaches the 0.20 m mark is

W_{\rm spring}=-\dfrac12\left(250\dfrac{\rm N}{\rm m}\right)(0.20\,\mathrm m)^2=-5.00\,\mathrm J

Compute the work performed by friction:

W_{\rm friction}-5.00\,\mathrm J=-6.76\,\mathrm J \implies W_{\rm friction}=-1.76\,\mathrm J

By Newton's second law, the net vertical force on the block is

∑ <em>F</em> = <em>n</em> - <em>mg</em> = 0   ==>   <em>n</em> = <em>mg</em>

where <em>n</em> is the magnitude of the normal force from the surface pushing up on the block. Then if <em>f</em> is the magnitude of kinetic friction, we have <em>f</em> = <em>µmg</em>, where <em>µ</em> is the coefficient of kinetic friction.

So we have

W_{\rm friction}=-f(0.20\,\mathrm m)

\implies -1.76\,\mathrm J=-\mu\left(2.0\,\mathrm{kg}\right)\left(9.8\dfrac{\rm m}{\mathrm s^2}\right)(0.20\,\mathrm m)

\implies \boxed{\mu\approx0.45}

You might be interested in
A Porsche 944 Turbo has a rated engine power of 217hp . 30% of the power is lost in the drive train, and 70% reaches the wheels.
scZoUnD [109]

Explanation:

(a)  It is given that two-third of weight is over the drive wheels. So, mathematically, w = \frac{2}{3}mg.

Hence, maximum force is expressed as follows.

                F_{max} = \mu_{s} \times w

           m \times a_{max} = \mu_{s} (\frac{2}{3} mg)

Hence, the maximum acceleration is calculated as follows.

             a_{max} = \frac{2}{3} \mu_{s} \times g

                          = \frac{2}{3} \times 1.00 \times 9.8 m/s^{2}

                          = 6.53 m/s^{2}

Hence, the maximum acceleration of the Porsche on a concrete surface where μs = 1 is 6.53 m/s^{2}.

(b)  Since, 30% of the power is lost in the drive train. So, the new power is 70% of P_{max}.

That is,   new power = 0.7 \times P_{max}

Now, the expression for power in terms of force and velocity is as follows.

                      P = F_{max} \nu

              0.7 P_{max} = ma_{max} \nu

Therefore, speed of the Porsche at maximum power output is as follows.

            \nu = 0.7 \times \frac{P_{max}}{ma_{max}}

                      = 0.7 \times \frac{217 hp \times \frac{746 W}{1 hp}}{1500 kg \times 6.53 m/s^{2}}

                      = 11.568 m/s

                      = 11.57 m/s

Therefore, speed of the Porsche at maximum power output is 11.57 m/s.

(c)   The time taken will be calculated as follows.

             time = \frac{\text{velocity}}{\text{acceleration}}

                     = \frac{11.57 m/s}{6.53 m/s^{2}}

                     = 1.77 s

Therefore, the Porsche takes 1.77 sec until it reaches the maximum power output.

6 0
2 years ago
An inline skater skates on a circular track 120.0 m in diameter at a tangential speed of 9.20 m/s. If the skater’s mass is 68.5
jok3333 [9.3K]

Answer:

The centripetal force acting on the skater is <u>48.32 N.</u>

Explanation:

Given:

Radius of circular track is, R=120.0\ m

Tangential speed of the skater is, v=9.20\ m/s

Mass of the skater is, m=68.5\ kg

We are asked to find the centripetal force acting on the skater.

We know that, when an object is under circular motion, the force acting on the object is directly proportional to the mass and square of tangential speed and inversely proportional to the radius of the circular path. This force is called centripetal force.

Centripetal force acting on the skater is given as:

F_c=\frac{mv^2}{R}

Now, plug in the given values of the known quantities and solve for centripetal force, F_c. This gives,

F_c=\frac{68.5\times (9.20)^2}{120.0}\\\\F_c=\frac{68.5\times 84.64}{120}\\\\F_c=\frac{5797.84}{120}\\\\F_c=48.32\ N

Therefore, the centripetal force acting on the skater is 48.32 N.

3 0
2 years ago
A wooden piece is made in different shapes take length (l) = radius (r) = 2m Calculate its volume as a:
In-s [12.5K]

This question deals with the volume of different shapes.

a) volume of the sphere is "33.51 m³".

b) volume of the cylinder is "25.13 m³".

a)

The volume of a sphere is given by the following formula:

Volume = \frac{4}{3}\pi r^3\\\\Volume = \frac{4}{3}\pi (2\ m)^3

<u>Volume = 33.51 m³</u>

<u />

b)

The volume of a cylinder is given by the following formula:

Volume = \pi r^2l\\\\Volume =\pi (2\ m)^2(2\ m)

<u>Volume = 25.13 m³</u>

<u />

Learn more about <em>volume </em>here:

brainly.com/question/16686115?referrer=searchResults

The attached picture shows the formulae of the <em>volume</em> of different shapes.

7 0
2 years ago
A person weighing 0.70 kn rides in an elevator that has an upward acceleration of 1.5 m/s2. what is the magnitude of the normal
creativ13 [48]
First of all, we can find the mass of the person, since we know his weight W:
W=mg=0.70 kN=700 N
And so
m= \frac{W}{g}= \frac{700 N}{9.81 m/s^2}=71.4 kg

We know for Newton's second law that the resultant of the forces acting on the person must be equal to the product between the mass and the acceleration a of the person itself:
\sum F =  ma
There are only two forces acting on the person: his weight W (downward) and the vincular reaction Rv of the floor against the body (upward). So we can rewrite the previous equation as
R_v -W = ma
We know the acceleration of the system, a=1.5 m/s^2 (upward, so with same sign of Rv), so we can solve to find the value of Rv, the normal force exerted by the elevator's floor on the person:
R_v = ma+W=(71.4 kg)(1.5 m/s^2)+700 N =807N
8 0
2 years ago
A man pushes a drum of oil 10kg up an incline OA. If OA is 5m and AB is 3m, what is the potential energy of the drum at A.​
Paladinen [302]

Answer:

294 Joules

Explanation:

From the question;

  • Mass of the drum is 10 kg
  • The length of inclined surface, OA is 5 m
  • The final height of the drum on the plane AB is 3 m

We are required to determine the potential energy of the drum at A

We know that potential energy is given by the formula;

Potential energy = mgh

where m is the mass, g is the gravitational pull and h is the height

Taking g as 9.8 N/kg

Then;

Potential energy = 10 kg × 9.8 N/kg × 3 m

                            = 294 Joules

Thus, the potential energy of the drum at A is 294 Joules

6 0
2 years ago
Read 2 more answers
Other questions:
  • A 1.0-kg ball has a velocity of 12 m/s downward just before it strikes the ground and bounces up with a velocity of 12 m/s upwar
    6·1 answer
  • According to Archimedes’ principle, the mass of a floating object equals the mass of the fluid displaced by the object. Use this
    13·1 answer
  • An agriculturalist working with Australian pine trees wanted to investigate the relationship between the age and the height of t
    9·1 answer
  • Given three different locations on Earth's surface, where will the weight of a person be greatest? in New York City, which is ab
    13·1 answer
  • Tech A says that tires are marked with a date code listing the date the tires should be discarded. Tech B says that any tires wi
    11·1 answer
  • A laser emits two wavelengths (λ1 = 420 nm; λ2 = 630 nm). When these two wavelengths strike a grating with 450 lines/mm, they pr
    13·1 answer
  • Global Precipitation Measurement (GPM) is a tool scientists use to forecast weather. Which statements describe GPM? Select three
    7·1 answer
  • A young child hold a string attached to a balloon. What is the reaction force to the balloon pulling up on the earth?
    12·1 answer
  • I need help plz help me out 10 points!!!!!!!
    6·2 answers
  • Let’s consider tunneling of an electron outside of a potential well. The formula for the transmission coefficient is T \simeq e^
    12·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!