Answer:
See explanation.
Explanation:
If each runner was holding the pole, the runner in the water side of the pole would probably be behind the other runner. Since running in knee deep is hard and makes you slower, the pole would be slanted.
Hey there!
A ball rolls 3 times. If she adds the three measurements and divides it by 3, it means that this is the average speed. The average speed is found by adding all measurements and dividing by the amount of numbers.
I hope this helps!
Divide the flow rate (0.750 m³/s) by the cross-sectional area of each pipe:
diameter = 40 mm ==> area = <em>π</em> (0.04 m)² ≈ 0.00503 m²
diameter = 120 mm ==> area = <em>π</em> (0.12 m)² ≈ 0.0452 m²
Then the speed at the end of the 40 mm pipe is
(0.750 m³/s) / (0.00503 m²) ≈ 149.208 m/s ≈ 149 m/s
(0.750 m³/s) / (0.0452 m²) ≈ 16.579 m/s ≈ 16.6 m/s
Answer:
People can capture geothermal energy through: Geothermal power plants, which use heat from deep inside the Earth to generate steam to make electricity. Geothermal heat pumps, which tap into heat close to the Earth's surface to heat water or provide heat for buildings
When the weather is cold, the water or refrigerant heats up as it travels through the part of the loop that's buried underground. Once it gets back above ground, the warmed water or refrigerant transfers heat into the building. The water or refrigerant cools down after its heat is transferred.