answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Inessa05 [86]
2 years ago
10

The fan blades suddenly experience an angular acceleration of 2 rad/s2. If the blades are rotating with an initial angular veloc

ity of 4 rad/s, determine the magnitude of the acceleration of point P when the blades have turned 2 revolutions. Ch16Prob4
a.115.95 ft/s^2
b.116 ft/s^2
c.0ft/s^2
d.3.5 ft/s^2
Engineering
1 answer:
madreJ [45]2 years ago
5 0

Answer:

Option B

116 ft/s^{2}

Explanation:

\theta=2 rev=2(2\pi)=4\pi

\alpha \theta=0.5(\omega_f^{2}-\omega_i^{2})

\alpha (4\pi)= 0.5(\omega_f^{2}-\omega_i^{2})

\alpha (8\pi)= (\omega_f^{2}-\omega_i^{2})

(2) (8\pi)= (\omega_f^{2}-\omega_i^{2})

(2) (8\pi)= (\omega_f^{2}-4^{2})

\omega_f=8.14 rads/s

v=r\omega=1.75*8.14=14.245 ft/s

Centripetal acceleration =\omega_f^{2} r=8.14^{2}*1.75=115.95 ft/s^{2}

Tangential component=dr=2*1.75=3.5

Resultant=\sqrt{3.5^{2}+115.95^{2}}\approx 116 ft/s^{2}

You might be interested in
a. (24 points) Describe the microstructure present in a 10110 steel after each step in each of the following heat treatments (no
Mrac [35]

Answer:

Explanation:

Please check the below file for the attached file

6 0
2 years ago
If the current on your power supply exceeds 500 mA it can damage the supply. Suppose the supply is set for 37 V. What is the sma
lilavasa [31]

Answer:

74 Ω

Explanation:

Data provided in the question:

Maximum value of the current that can be provided = 500 mA

= 500 × 10⁻³ A  

Applied voltage set for the system = 37 V

Now,  

The smallest resistance that can be measured    

= [ Applied voltage ] ÷ [ Maximum current that can be applied ]

= 37 ÷ (  500 × 10⁻³ )

= 74 Ω

4 0
2 years ago
On the reality television show "Survivor," two tribes compete for luxuries such as food and shelter. During such challenges, one
Ivan

Answer:

Realistic Group Conflict Theory

Explanation:

Realistic Group Conflict theory is a socio-psychological model of internal conflicts among groups.

These groups may compete for a scarce resources based on reality or perception.

These conflicts may be over political power, capital, or social status, etc.

According to this theory, in the competition, only one group wins over the scarce resources while the other has to lose.

Thus The reality show on the television showing two tribes competing for food and shelter where the success of one is the failure for the other is based on Realistic Group Conflict Theory.

5 0
2 years ago
The ingredient weights for making 1 yd (cyd) of concrete by assuming aggregates in SSD state are given below. The volume of air
Pachacha [2.7K]

Answer:

Explanation:

Ans) Given batch weight of each component :

Cement = 700 lb

Water = 315 lb

Coarse aggregate = 1575 lb

Fine aggregate = 1100 lb

Part 1) Amount of water = 328.5 lb

Amount of water is needed to be increased if the aggregates has absorption capacity, To maintain constant water cement ratio, the mixing water is increased because some of the water is absorbed by aggregates.

Amount of water absorbed = 328.5 lb - 315 lb = 13.5 lb

Total amount of aggregates = 1575 + 1100 = 2675 lb

=> % Absorption capacity = 13.5 x 100 / 2675 = 0.5 %

Hence, new amount of Coarse aggregate = (1 - 0.005) x 1575 lb = 1567.125 lb

New amount of fine aggregate = (1 - 0.005) x 1100 = 1094.5 lb

Since, water cement ratio is maintained constant , amount of cement remains unchanged

=> Volume of water = 328.5 / 62.4 = 5.26 ft3

=> Volume of cement = 700 / (3.15 x 62.4) = 3.56 ft3

=> Volume of coarse aggregate = 1567.125 / (2.4 x 62.4) = 10.46 ft3

=> Volume of fine aggregate = 1100 / (2.4 x 62.4) = 7.34 ft3

Volume of air = 2% = 0.02 x 27 = 0.54 ft3

Total concrete volume = 5.26 + 3.56 + 10.46 + 7.34 + 0.54 \approx 27 ft3 = 1 yd3

Hence, calculated amount of each component is correct

Part 2) We know, minus sign indicated that the aggregate will absorb some moisture from concrete, hence mixing water amount needed to be corrected .

=> Amount of water absorbed by coarse aggregate = 0.01 x 1567.125 lb = 15.67 lb

=> Amount of water absorbed by fine aggregate = 0.02 x 1094.50 lb = 21.89 lb

Total amount of water absorbed = 15.67 + 21.89 = 37.56 lb

To maintain same water cement ratio, amount of mixing water is needed to be increased

=> Corrected amount of mixing water = 328.5 lb + 37.56 lb = 366 lb

=> Corrected amount of coarse aggregate = (1 - 0.01) x 1567.125 = 1551.45 lb

=> Corrected amount of fine aggregate = (1 - 0.02) x 1094.5 = 1072.6 lb

Part 3) We know,

Unit weight = Sum of weight of each material / Total volume

=> Sum of weight = 366 + 700 + 1551.45 + 1072.6 = 3690.05 lb

Total volume = 1 yd3 or 27 ft3

=> Expected Unit Weight = 3690.05 lb / 27 ft3 = 136.67 lb/ft3

Also, Concrete Yield = Weight of all components / Unit weight of concrete

=> Yield = 3690.05 / 136.67 = 27 ft3 or 1 yd3

4 0
2 years ago
Write a method printShampooInstructions(), with int parameter numCycles, and void return type. If numCycles is less than 1, prin
kirill [66]

Answer:

// The method is defined with a void return type

// It takes a parameter of integer called numCycles

// It is declared static so that it can be called from a static method

public static void printShampooInstructions(int numCycles){

// if numCycles is less than 1, it display "Too few"

   if (numCycles < 1){

       System.out.println("Too few.");

   }

// else if numCycles is less than 1, it display "Too many"

    else if (numCycles > 4){

       System.out.println("Too many.");

   }

// else it uses for loop to print the number of times to display

// Lather and rinse

  else {

       for(int i = 1; i <= numCycles; i++){

           System.out.println(i + ": Lather and rinse.");

       }

       System.out.println("Done");

       

   }

}

Explanation:

The code snippet is written in Java. The method is declared static so that it can be called from another static method. It has a return type of void. It takes an integer as parameter.

It display "Too few" if the passed integer is less than 1. Or it display "Too much" if the passed integer is more than 4. Else it uses for loop to display "Lather and rinse" based on the passed integer.

8 0
2 years ago
Other questions:
  • CHALLENGE ACTIVITY 2.8.1: Using constants in expressions. The cost to ship a package is a flat fee of 75 cents plus 25 cents per
    7·1 answer
  • A bankrupt chemical firm has been taken over by new management. On the property they found a 20,000-m3 brine pond containing 25,
    13·1 answer
  • tech A says that a Hall-effect sensor can be used in an electronic ignition system. Tech B says that an optical-type sensor can
    6·1 answer
  • 4-6. A vertical cylindrical storage vessel is 10 m high and 2 m in diameter. The vessel contains liquid cyclohexane currently at
    10·1 answer
  • Python Homework
    12·1 answer
  • ) A given system has four sensors that can produce an output of 0 or 1. The system operates properly when exactly one of the sen
    9·1 answer
  • The velocity distribution for laminar flow between parallel plates is given by u umax = 1 − ( 2y h ) 2 Where h is the distance s
    15·1 answer
  • The rate of flow through an ideal clarifier is 8000m3 /d, the detention time is 1h and the depth is 3m. If a full-length movable
    5·1 answer
  • Test if a number grade is an A (greater than or equal to 90). If so, print "Great!". Hint: Grades may be decimals. Sample Run En
    15·1 answer
  • Find the velocity and rate of flow of water through a rectangular channel of 6m wide and 3m deep when it's running full. The cha
    13·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!