answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Orlov [11]
2 years ago
15

A 400.0-m-wide river flows from west to east at 30.0 m/min. Your boat moves at 100.0 m/min relative to the water no matter which

direction you point it. To cross this river, you start from a dock at point A on the south bank. There is a boat landing directly opposite at point B on the north bank, and also one at point C , 75.0 m downstream from B .
A: Where on the north shore will you land if you point your boat perpendicular to the water current?
B: What distance will you have traveled, if you point your boat perpendicular to the water current?
C: That is, the direction of your boat will remain perpendicular to the direction of the water current for the entire crossing?
D: If you initially aim your boat directly toward point C and do not change that bearing relative to the shore, where on the north shore will you land? To reach point C at what bearing (angleϕ north of west) must you aim your boat? "Bearing" means the direction of the boat with respect to the water, not the land. Again, you should imagine that you can only look at the water to determine your direction (and not use a compass, or look at features on shore to make corrections in the direction) and that this direction is maintained for the entire trip across the river?
E: Refer to part D. How long (t) will it take to cross the river?
F: Refer to part D. What distance (d, as measured by an observer on the ground) do you travel?
G: Refer to part D. What is the speed of your boat as measured by an observer standing on the river bank (v=|VbG|)?
Physics
1 answer:
Ratling [72]2 years ago
5 0

Answer:

a. boat would drift towards a NE direction

b. 104.4m/min * t

c. false

d. point downstream of c, -79.19 deg NE

e. 3.898mins

f. 389.8m

Explanation:

a. downstream is a location with respect to the direction of the flow of the river, in this case from west to east. the boat would drift towards the NE direction due to the direction of water current.

b. lets say it takes time t to travel across the river, the resultant speed of boat would be given as Rs= sqrt ( 100/min^2 + 30m/mins^2) = 104.4m/mins

distance traveled would be 104.4 *t

c. false, the direction of boat wouldnt remain perpendicular the entire crossing but would drift toward the NE bearing provided the driver doesnt change or steer the boat.

d. a. taking the definition of downstream in question (a), your boat would land at a point x downstream to c

   b. to land at c boat must be inclined at an angle of -79.19 deg NE, given by using the width of river and the distance of b to c.

                            cosФ= 75/ 400

                                  Ф= 79.19°NE to get to c you must position boat at an angle of -79.19 deg from your initial bearing.

e. speed = distance/ time, time = distance / speed.

aiming toward point c, speed of boat is the resultant speed of boat with respect to the speed of water, using Pythagoras also

speed=  \sqrt{ 100^{2} + 30^{2} } = 104m/mins

distance to move from point a to c is given also given by

distance = \sqrt{400^{2} + 75^{2} }= 406.97m

time = 406.97/ 104.4 = 3.89mins...

f. on the ground the observer see the boat speed as 100m/min.

distance traveled is given by speed * time= 100 * 3.89= 389m

g. speed of boat observed would be 100m/min

You might be interested in
If the envelope and gondola have a total mass of 4300 kg, what is the maximum cargo load when the blimp flies at a sea-level loc
geniusboy [140]

Complete question:

The classic Goodyear blimp is essentially a helium balloon— a big one, containing 5700 m³ of helium. If the envelope and gondola have a total mass of 4300 kg, what is the maximum cargo load when the blimp flies at a sea-level location? Assume an air temperature of 20°C.

Answer:

52.4 kN

Explanation:

The helium at 20°C has a density of 0.183 kg/m³, and the cargo load is the weight of the system, which consists of the envelope, the gondola, and the helium.

The helium mass is the volume multiplied by the density, thus:

mHe = 5700 * 0.183 = 1043.1 kg

The total mass is then 5343.1 kg. The weight is the mass multiplied by the gravity acceleration (9.8 m/s²), so:

W = 5343.1*9.8

W = 53362.38 N

W = 52.4 kN

5 0
2 years ago
Read 2 more answers
A 1.25 in. by 3 in. rectangular steel bar is used as a diagonal tension member in a bridge truss. the diagonal member is 20 ft l
pentagon [3]

Answer:

axial stress in the diagonal bar =36,000 psi

Explanation:

Assuming we have to find axial stress

Given:

width of steel bar: 1.25 in.

height of the steel bar: 3 in

Length of the diagonal member = 20ft

modulus of elasticity E= 30,000,000 psi

strain in the diagonal member ε = 0.001200 in/in

Therefore, axial stress in the diagonal bar σ = E×ε

=  30,000,000 psi×  0.001200 in/in =36,000 psi

5 0
2 years ago
The Olympic record for running the 200m dash is 19.3 seconds. What is the average speed for this record?
Aloiza [94]
I think it’s c. if not i’m sorry!!
3 0
2 years ago
UDAY WAS TOLD TO PUT SOME CONTAINERS IN ONE OF THE COLD STORES AT WORK. THE LABLES ON THE CONTAINERS READ STORE BELOW -5 C.THERE
Alja [10]
He should choose the room that’s 15 F.

-5 C = 23 F
Meaning that 15 F is below -5 C and 25 F is not.
3 0
2 years ago
Assume that the length of the magnet is much smaller than the separation between it and the charge. As a result of magnetic inte
faltersainse [42]

Answer:

Assuming that the length of the magnet is much smaller than the separation between it and the charge. As a result of magnetic interaction (i.e., ignore pure Coulomb forces) between the charge and the bar magnet, the magnet will not experience any torque at all - option A

Explanation:

Assuming that the length of the magnet is much smaller than the separation between it and the charge. As a result of magnetic interaction (i.e., ignore pure Coulomb forces) between the charge and the bar magnet, the magnet will not experience any torque at all; the reason being that: no magnetic field is being produced by a charge that is static. Only a moving charge can produce a magnetic effect. And the magnet can not have any torque due to its own magnetic lines of force.

5 0
2 years ago
Other questions:
  • Find the acceleration of a forklift of mass 1400 kg pushed by a force of 2100 N that is opposed by friction force of 425 N
    9·1 answer
  • A man swims at a speed of 0.4 m/s. How long will it take him to cross a pool of length 50 m?
    15·1 answer
  • The short vertical parts adjacent to it also reach into the magnetic field and should experience forces. why can we neglect them
    7·1 answer
  • Which combination of initial horizontal velocity, (vh) and initial vertical velocity, (vv) results in the greatest horizontal ra
    7·1 answer
  • Two convex thin lenses with focal lengths 10.0 cm and 20.0 cm are aligned on a common axis, running left to right, the 10-cm len
    11·1 answer
  • You and your friend Peter are putting new shingles on a roof pitched at 20degrees . You're sitting on the very top of the roof w
    5·1 answer
  • Points a and b lie in a region where the y-component of the electric field is Ey=α+β/y2. The constants in this expression have t
    9·1 answer
  • Monochromatic light is incident on a grating that is 75 mm wide and ruled with 50,000 lines. the second-order maximum is seen at
    9·1 answer
  • Sara and Saba are identical twins who are the same in every way, including their weights. One day, Sara and Saba decided to go f
    12·1 answer
  • Picture a long, straight corridor running east-west, with a water fountain located somewhere along it. Starting from the west en
    12·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!