The answer in the blank is that it is difficult to accelerate at decelerate the vehicle when it is on a fast speed because having a fast speed makes it difficult to adjust the meter as well as if you try to decelerate the vehicle, it could burn out the tires and engine as it is in the fast speed, in accelerating it, it could also be complicated because it would only make the car faster enough that you may no longer control of how to stop it.
Answer:
Volume of gasoline that expands and spills out is 1.33 ltr
Explanation:
As we know that when temperature of the liquid is increased then its volume will expand and it is given as
here we know that
volume expansion coefficient of the gasoline is given as
change in temperature is given as
Now we have
Answer:
If the mass of a star is greater than 3 solar masses, it will create a black hole. If its mass is less, it will create a neutron star.
Explanation:
If a star's gravity is high enough, when it condenses on itself, it will form a black hole. Otherwise, it will create a large amount of highly dense matter, such as a neutron star. It can be said that if the mass of a star is greater than 3 solar masses, it will create a black hole. If its mass is less, it will create a neutron star.
Answer:
R₂ / R₁ = D / L
Explanation:
The resistance of a metal is
R = ρ L / A
Where ρ is the resistivity of aluminum, L is the length of the resistance and A its cross section
We apply this formal to both configurations
Small face measurements (W W)
The length is
L = W
Area
A = W W = W²
R₁ = ρ W / W² = ρ / W
Large face measurements (D L)
Length L = D= 2W
Area A = W L
R₂ = ρ D / WL = ρ 2W / W L = 2 ρ/L
The relationship is
R₂ / R₁ = 2W²/L
Answer:
y_red / y_blue = 1.11
Explanation:
Let's use the constructor equation to find the image for each wavelength
1 /f = 1 /o + 1 /i
Where f is the focal length, or the distance to the object and i the distance to the image
Red light
1 / i = 1 / f - 1 / o
1 / i_red = 1 / f_red - 1 / o
1 / i_red = 1 / 19.57 - 1/30
1 / i_red = 1,776 10-2
i_red = 56.29 cm
Blue light
1 / i_blue = 1 / f_blue - 1 / o
1 / i_blue = 1 / 18.87 - 1/30
1 / i_blue = 1,966 10-2
i_blue = 50.863 cm
Now let's use the magnification ratio
m = y ’/ h = - i / o
y ’= - h i / o
Red Light
y_red ’= - 5 56.29 / 30
y_red ’= - 9.3816 cm
Light blue
y_blue ’= 5 50,863 / 30
y_blue ’= - 8.47716 cm
The ratio of the height of the two images is
y_red ’/ y_blue’ = 9.3816 / 8.47716
y_red / y_blue = 1,107
y_red / y_blue = 1.11
