answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
agasfer [191]
2 years ago
10

Create a plot of the force of static friction, fsfsf_s, versus the x component of the pulling force, FxFxF_x, for the experiment

. Let the point FminFminF_min, along the horizontal axis, represent the minimum force required to accelerate the crate.

Engineering
1 answer:
Crank2 years ago
8 0

Answer:

The graph between the static force and the x component of the pulling force is given as indicated in the figure.

Explanation:

The graph between the static force and the x component of the pulling force is given as indicated in the figure. The point of minimum force is also identified on the graph to indicate the minimum force required to overcome the static friction and accelerate the crate.

You might be interested in
A three-story school has interior column bays that are spaced 25 ft apart in both directions. If the loading on the flat roof is
Lady_Fox [76]

Answer:

Explanation:

Floor Load:

Lo= 50psf

At= 25x25 = 625 square feet

L= Lo(0.25 +15/\sqrt{KuAt)}

L=50(0.25+15/\sqrt{(4)(625)}= 13.1psf

%reduction= 13.1/50 = 26%

Fr= 3[(13.1psf)(25ft)(25ft)+(20psf)(25ft)(25ft)]= 62k

7 0
2 years ago
Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA
weqwewe [10]
OSHA inspections are generally unannounced. In fact, except in four exceptional circumstances when advance notice may be given.


It is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection.
5 0
2 years ago
The air contained in a room loses heat to the surroundings at a rate of 50 kJ/min while work is supplied to the room by computer
Artemon [7]

Answer:

net amount of energy change of the air in the room during a 30-min period = 660KJ

Explanation:

The detailed calculation is as shown in the attached file.

4 0
2 years ago
Read 2 more answers
A 227 pound compressor is supported by four legs that contact the floor of a machine shop. At the bottom of each leg there is a
Ganezh [65]

Answer:

1.312 in

Explanation:

Data provided in the question:

Weight of the compressor, W = 227 pound

Number of legs = 4

Maximum pressure = 42 psi

Now,

Let F be the force taken by the legs

Therefore,

W = 4F

or

227 pound = 4F

or

F = 56.75 pounds

Also,

Force = Pressure × Area

or

56.75 pounds = 42 psi × πr²                      [ r is the diameter of one leg]

or

r² = 0.4301

or

r = 0.656

therefore,

diameter = 2r = 2 × 0.656

= 1.312 in

6 0
2 years ago
A dielectric material, such as Teflon®, is placed between the plates of a parallel-plate capacitor without altering the structur
Lina20 [59]

Answer: The electric field decreases because of the insertion of the Teflon.

Explanation:

If the charge on the capacitor is held fixed, the electric field as a consequence of this charge distribution (directed from the positive charged plate to the negative charged one remains unchanged.

However, as the Teflon is a dielectric material, even though doesn't allow the free movement of the electrons as an answer to an applied electric field, it allows that the electrons be displaced from the equilibrium position, leaving a local negative-charged zone close to the posiitive plate of the capacitor, and an equal but opposite charged layer close to the negative plate.

In this way, a internal electric field is created, that opposes to the external one due to the capacitor, which overall effect is diminishing the total electric field, reducing the voltage between the plates, and  increasing the capacitance proportionally to the dielectric constant of the Teflon.  

8 0
2 years ago
Other questions:
  • The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)-
    11·1 answer
  • A pitfall cited in Section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of th
    6·1 answer
  • If the electric field just outside a thin conducting sheet is equal to 1.5 N/C, determine the surface charge density on the cond
    9·1 answer
  • At a certain college, 30% of the students major in engineering, 20% play club sports, and 10% both major in engineering and play
    14·1 answer
  • A driver traveling at 65 mi/h rounds a curve on a level grade to see a truck overturned across the roadway at a distance of 350
    13·1 answer
  • A piece of corroded metal alloy plate was found in a submerged ocean vessel. It was estimated that the original area of the plat
    6·1 answer
  • Five Kilograms of continuous boron fibers are introduced in a unidirectional orientation into of an 8kg aluminum matrix. Calcula
    9·1 answer
  • Refrigerant-134a is compressed from 2 bar, saturated vapor, to 10 bar, 90o C in a compressor operating at steady state. The mass
    11·1 answer
  • Draw an ERD for each of the following situations. (If you believe that you need to make additional assumptions, clearly state th
    15·1 answer
  • technician A says that in any circuit, electrical current takes the path of least resistance. technician B says that while this
    13·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!