answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
sp2606 [1]
2 years ago
7

The Little Prince Computer (LPC) is a mutant variation on the LMC. The LPC is so named because the differences are a royal plan)

. The LPC has one additional instruction. The extra instruction requires two consecutive words: 0X0 The Little Prince Computer (LPC) is a mutant variation on the LMC. The LPC is so named because the differences are a royal plan). The LPC has one additional instruction. The extra instruction requires two consecutive words: 0XX 0YY
Engineering
1 answer:
valentinak56 [21]2 years ago
5 0

Answer:

From register to register next is register to indexed storage and next to register to storage and the to single oprand and finally to storage to storage.

Explanation:

Within the CPU, the most important components are registers. Data may be moved between registers, may be added or subtracted from the current contents of a register, and can be shifted or rotated within a register or between registers. Each instruction in the instruction set is executed by performing these simple operations, using the appropriate choice of registers and operations in the correct sequence for the particular instruction.

You might be interested in
An annealed copper strip of 228 mm wide and 25 mm thick being rolled to a thickness of 20 mm, in one pass. The roll radius is 30
sdas [7]

Answer:

The roll force is 1.59 MN

The power required in this operation is 644.96 kW

Explanation:

Given;

width of the annealed copper, w = 228 m

thickness of the copper, h₀ = 25 mm

final thickness, hf = 20 mm

roll radius, R = 300 mm

The roll force is given by;

F = LwY_{avg}

where;

w is the width of the annealed copper

Y_{avg} is average true stress of the strip in the roll gap

L is length of arc in contact, and for frictionless situation it is given as;

L = \sqrt{R(h_o-h_f)} \\\\L = \sqrt{300(25-20)}\\\\L = 38.73 \ mm

Now, determine the average true stress, Y_{avg}, for the annealed copper;

The absolute value of the true strain, ε = ln(25/20)

ε = 0.223

from true stress vs true strain graph; at true strain of 0.223, the true stress is 280 MPa.

Then, the average true stress = ¹/₂(280 MPa.) = 180 MPa

Finally determine the roll force;

F = LwY_{avg}

F = (\frac{38.73 }{1000})(\frac{228}{1000})*180 \ MPa\\\\F =   1.59 \ MN

The power required in this operation is given by;

P = \frac{2\pi FLN}{60}\\\\P =  \frac{2\pi (1.59*10^6)(0.03873)(100)}{60}\\\\P = 644955.2 \ W\\\\P = 644.96 \ kW

5 0
2 years ago
Identify the four engineering economy symbols and their values from the following problem statement. Use a question mark with th
Vilka [71]

Answer:

The company will have $311,424 in its investment set-aside account.

Explanation:

To determine the amount of money that the company will have after 7 years with an interest rate of 11% per year, we must calculate the price to start with an increase of 11%, and then repeat the operation until reaching seven years:

Year 0: 150,000

Year 1: 150,000 x 1.11 = 166,500

Year 2: 166,000 x 1.11 = 184,815

Year 3: 184,815 x 1.11 = 205,144.65

Year 4: 205,144.65 x 1.11 = 227,710.56

Year 5: 227,710.56 x 1.11 = 252,758.72

Year 6: 252,758.72 x 1.11 = 280,562.18

Year 7: 280,562.18 x 1.11 = 311,424

3 0
2 years ago
A center-point bending test was performed on a 2 in. x d in. wood lumber according to ASTM D198 procedure with a span of 4 ft an
Zigmanuir [339]

Answer:

3.03 INCHES

Explanation:

According to ASTM D198 ;

Modulus of rupture = ( M / I ) * y  ----- ( 1 )

M ( bending moment ) = R * length of span / 2

                                     = (120 * 10^3 ) * 48 / 2 = 288 * 10^4 Ib-in

I ( moment of inertia ) = bd^3 / 12

                                    = ( 2 )*( d )^3  / 12 =  2d^3 / 12

b = 2 in ,  d = ?

length of span = 4 * 12 = 48 inches

R = P  / 2 =  240 * 10^3 / 2 =   120 * 10^3 Ib

y ( centroid distance ) = d / 2  inches

back to equation ( 1 )

( M / I ) * y

940.3 ksi = ( 288 * 10^4 / 2d^3 / 12 ) * d / 2

                = ( 288 * 10^4 * 12 ) / 2d^3 )  * d / 2

940300  = 34560000* d / 4d^3

4d^3 ( 940300 ) = 34560000 d  ( divide both sides with d )

4d^2 = 34560000 / 940300

d^2 = 9.188   ∴ Value of d ≈ 3.03 in

8 0
2 years ago
An electric field is expressed in rectangular coordinates by E = 6x2ax + 6y ay +4az V/m.Find:a) VMN if point M and N are specifi
Fittoniya [83]

Answer:

a.) -147V

b.) -120V

c.) 51V

Explanation:

a.) Equation for potential difference is the integral of the electrical field from a to b for the voltage V_ba = V(b)-V(a).

b.) The problem becomes easier to solve if you draw out the circuit. Since potential at Q is 0, then Q is at ground. So voltage across V_MQ is the same as potential at V_M.

c.) Same process as part b. Draw out the circuit and you'll see that the potential a point V_N is the same as the voltage across V_NP added with the 2V from the other box.

Honestly, these things take practice to get used to. It's really hard to explain this.

3 0
2 years ago
referring to either the CMS file or code book index, what is the cross reference for reduction of a dislocation?
Oksi-84 [34.3K]

Answer:

reposition

Explanation:

if you go to your icd 10 pcs index located on page 1 then  look up reduction the subterm is of a dislocation which leads you to the answer reposition

4 0
2 years ago
Other questions:
  • 1. Which type of sketch most accurately represents what the finished product will look like?
    11·1 answer
  • Gina is about to use a fire extinguisher on a small fire. What factor determines the type of extinguisher she should use
    9·2 answers
  • Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 10 bar, 1500 K and exit at 1.97 bar and 900 K.
    7·1 answer
  • Consider water at 27°C in parallel flow over an isothermal, 1‐m‐long flat plate with a velocity of 2 m/s. a) Plot the variation
    15·1 answer
  • The atomic radii of a divalent cation and a monovalent anion are 0.77 nm and 0.136 nm, respectively.1- Calculate the force of at
    11·1 answer
  • A piston-cylinder assembly contains 2 lb of air at a temperature of 540 °R and a pressure of 1 atm. The air compressed to a stat
    5·1 answer
  • Oil enters a counterflow heat exchanger at 600 K with a mass flow rate of 10 kg/s and exits at 200 K. A separate stream of liqui
    12·1 answer
  • Solid spherical particles having a diameter of 0.090 mm and a density of 2002 kg/m3 are settling in a solution of water at 26.7C
    8·1 answer
  • 1. A _____ is applied to a wall or roof rafters to add strength and keep the building straight and plumb.
    9·1 answer
  • Problema sobre programacion orientada a objetos!!
    14·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!