All categories

2 years ago

Draw The Vector C⃗ =A⃗ +B⃗ Draw The Vector D⃗ =A⃗ −B⃗ .

Physics

1 answer:

jarptica [38.1K]2 years ago

6 0

Answer:

anybody nonliving answers I will give you ok now draw a water yes rod c-dot a + b is the water is d + a + b minus is equal to what

You might be interested in

What is the threshold frequency for sodium metal if a photon with frequency 6.66 × 1014 s−1 ejects a photon with 7.74 × 10−20 J

FrozenT [24]

Answer:

5.5 × 10^14 Hz or s^-1

no orange light has less frequency so no photoelectric effect

Explanation:

hf = hf0 + K.E

HERE h is Planck 's constant having value 6.63 × 10 ^-34 J s

f is frequency of incident photon and f0 is threshold frequency

hf0 = hf- k.E

6.63 × 10 ^-34 × f0 = 6.63 × 10 ^-34× 6.66 × 10^14 - 7.74× 10^-20

6.63 × 10 ^-34 × f0 = 3.64158×10^-19

f0 = 3.64158×10^-19/ 6.63 × 10 ^-34

f0 = 5.4925 × 10^14

f0 =5.5 × 10^14 Hz or s^-1

frequency of orange light is 4.82 × 10^14 Hz which is less than threshold frequency hence photo electric effect will not be observed for orange light

8 0

2 years ago

Why do charges build up on clothing in an electric dryer?

Rzqust [24]

Charges build up when you have dry air and friction ,the heat to clothes which dry it out and causes friction.

4 0

2 years ago

Read 2 more answers

Describe the energy transformations that take place when a skier starts skiing down a hill but after a time is brought to rest b

Andrews [41]

<span>The skier will transform their gravitational energy into mostly kinetic energy (with a minor amount transformed into heat from the friction of the skis across the snow and air friction). Once the skier hits the snowdrift, their kinetic energy is transferred into the snow which moves when they strike it due to the kinetic energy that is now in the snow. Along with again a minor amount of heat energy transferred as they move through the snowdrift.</span>

6 0

2 years ago

In an attempt to impress its friends, an acrobatic beetle runs and jumps off the bottom step of a flight of stairs. The step is

Aleks04 [339]

Answer:

0.3677181864 m

Explanation:

u = Velocity = 1.5 m/s

$\theta$ = Angle = 20°

y = -20 cm

Velocity components

$u_x=ucos\theta\\\Rightarrow u_x=1.5cos20\\\Rightarrow u_x=1.40953\ m/s$

$u_y=usin\theta\\\Rightarrow u_y=1.5sin20\\\Rightarrow u_y=0.51303\ m/s$

Acceleration components

$a_x=0$

$a_y=-9.81\ m/s^2$

$y=u_yt+\dfrac{1}{2}a_yt^2\\\Rightarrow -0.2=0.51303\times t+\dfrac{1}{2}\times -9.81t^2\\\Rightarrow 4.905t^2-0.51303t-0.2=0$

$t=\frac{-\left(-0.51303\right)+\sqrt{\left(-0.51303\right)^2-4\cdot \:4.905\left(-0.2\right)}}{2\cdot \:4.905}, \frac{-\left(-0.51303\right)-\sqrt{\left(-0.51303\right)^2-4\cdot \:4.905\left(-0.2\right)}}{2\cdot \:4.905}\\\Rightarrow t=0.26088, -0.15629$

Time taken is 0.26088 seconds

$x=u_xt+\dfrac{1}{2}a_xt^2\\\Rightarrow x=1.40953\times 0.26088\\\Rightarrow x=0.3677181864\ m$

The distance the beetle travels on the ground is 0.3677181864 m

6 0

2 years ago

A car traveling at speed v takes distance d to stop after the brakes are applied. What is the stopping distance if the car is in

Vikki [24]

49d

<h3>Further explanation</h3>

This case is about uniformly accelerated motion.

<u>Given:</u>

The initial speed was v takes distance d to stop after the brakes are applied.

<u>Question:</u>

What is the stopping distance if the car is initially traveling at speed 7.0v?

Assume that the acceleration due to the braking is the same in both cases. Express your answer using two significant figures.

<u>The Process:</u>

The list of variables to be considered is as follows.

$\boxed{u \ or \ v_i = initial \ velocity}$
$\boxed{u \ or \ v_t \ or \ v_i = terminal \ or \ final \ velocity}$
$\boxed{a = acceleration \ (constant)}$
$\boxed{d = distance \ travelled}$

The formula we follow for this problem are as follows:

$\boxed{ \ v^2 = u^2 + 2ad \ }$

a = acceleration (in m/s²)
u = initial velocity
v = final velocity
d = distance travelled

Step-1

We substitute v as the initial speed, distance of d, and zero for final speed into the formula.

$\boxed{ \ 0 = v^2 + 2ad \ }$

$\boxed{ \ v^2 = -2ad \ }$

Both sides are divided by -2d, we get $\boxed{ \ a = \Big( -\frac{v^2}{2d} \Big) \ . . . \ (Equation-1) \ }$

Step-2

We substitute 7.0v as the initial speed, zero for final speed, and Equation-1 into the formula.

$\boxed{ \ 0 = (7.0v)^2 + 2 \Big( -\frac{v^2}{2d} \Big)d' \ }$

Here d' is the stopping distance that we want to look for.

$\boxed{ \ 2 \Big( \frac{v^2}{2d} \Big)d' = (7.0v)^2 \ }$

We crossed out 2 in above and below.

$\boxed{ \ \Big( \frac{v^2}{d} \Big)d' = 49.0v^2 \ }$

We multiply both sides by d.

$\boxed{ \ v^2 d' = 49.0v^2 d \ }$

We crossed out v^2 on both sides.

$\boxed{\boxed{ \ d' = 49.0d \ }}$

Hence, by using two significant figures, the stopping distance if the car is initially traveling at speed 7.0v is 49d.

<h3>Learn more</h3>

Determine the acceleration of the stuffed bear brainly.com/question/6268248
Particle's speed and direction of motion brainly.com/question/2814900
About the projectile motion brainly.com/question/2746519

Keywords: a car traveling at speed v, takes distance d to stop after the brakes are applied, the stopping distance, if the car is initially traveling at speed 7.0v, the acceleration due to the braking is the same, two significant figures.

6 0

2 years ago

Read 2 more answers