All categories

2 years ago

Explain what you think controls a material’s porosity

1 answer:

7 0

The primary porosity of a sediment or rock consists of the spaces between the grains that make up that material. The more tightly packed the grains are, the lower the porosity.

You might be interested in

Rahul and Manav each were given a mixture of iron filings and sulphur powder. Rahul heated the mixture strongly and a new substa

AlexFokin [52]

Answer:

sure

Explanation:

The substance formed after heating the mixture of that of Rahul is caleed a compound. Whereas, Manav's mixture still remains in its current stae that is a heterogeneous mixture.

The compound formed is in black in color whereas the mixture is a mix of brownish-red and yellow.

The compound is a homogeneous mixture whereas the mixture is a heterogenous mixture because of its uneven distribution.

3 0

2 years ago

What is the name of the functional group that is attached to this hydrocarbon? The first and last of a chain of three carbons ar

disa [49]

Answer:

Ketone

Explanation:

As you are stating here, we have a carbonated chain of three carbons, and the first and last has 3 Hydrogens, then this means that we have CH₃ . The center carbon is a carbon double bonded to oxygen.

In general terms this belongs to the carbonyl group. However, this alone does not represent a functional group, but when it's in a chain with other radycals or chains, it becomes a functional group.

In this case, the molecule you are talking here is the following:

CH₃ - CO - CH₃

This molecule is known as the Acetone, and has the general form of:

R - CO - R'

Which belongs to a ketone as a functional group.

4 0

2 years ago

What mitigation measures can communities do to reduce the damage and impact of sudden geologic hazards?

jasenka [17]

Explanation:

require an emergency support immediately

4 0

2 years ago

A 24.1-g mixture of nitrogen and carbon dioxide is found to occupy a volume of 15.1 L when measured at 870.2 mmHg and 31.2oC. Wh

zmey [24]

Answer:

Mole fraction of nitrogen = 0.52

Explanation:

Given data:

Temperature = 31.2 °C

Pressure = 870.2 mmHg

Volume = 15.1 L

Mass of mixture = 24.1 g

Mole fraction of nitrogen = ?

Solution:

Pressure conversion:

870.2 /760 = 1.12 atm

Temperature conversion:

31.2 + 273 = 304.2 K

Total number of moles:

PV = nRT

n = PV/RT

n = 1.12 atm × 15.1 L / 0.0821 L.atm. mol⁻¹.K⁻¹ × 304.2 K

n = 16.9 L.atm. /25 L.atm. mol⁻¹

n = 0.676 mol

Number of moles of nitrogen are = x

Then the number of moles of CO₂ = 0.676 - x

Mass of nitrogen = x mol . 28 g/mol and for CO₂ Mass = 44 g/mol ( 0.676 - x)

24.1 = 28x + ( 29.7 -44x)

24.1 - 29.7 = 28x - 44x

-5.6 = -16 x

x = 0.35

Mole fraction of nitrogen:

Mole fraction of nitrogen = moles of nitrogen / total number of moles

Mole fraction of nitrogen = 0.35 mol / 0.676 mol

Mole fraction of nitrogen = 0.52

3 0

2 years ago

If a 1.00 mL sample of the reaction mixture for the equilibrium constant experiment required 32.40 mL of 0.258 M NaOH to titrate

andrey2020 [161]

Answer:

The concentration of acetic acid is 8.36 M

Explanation:

Step 1: Data given

Volume of acetic acid = 1.00 mL = 0.001 L

Volume of NaOH = 32.40 mL = 0.03240 L

Molarity of NaOH = 0.258 M

Step 2: The balanced equation

CH3COOH + NaOH → CH3COONa + H2O

Step 3: Calculate the concentration of the acetic acid

b*Ca*Va = a*Cb*Vb

⇒with b = the coefficient of NaOH = 1

⇒with Ca = the concentration of CH3COOH = TO BE DETERMINED

⇒with Va = the volume of CH3COOH = 1.00 mL = 0.001L

⇒with a = the coefficient of CH3COOH = 1

⇒with Cb = the concentration of NaOH = 0.258 M

⇒with Vb = the volume of NaOH = 32.40 mL = 0.03240 L

Ca * 0.001 L = 0.258 * 0.03240

Ca = 8.36 M

The concentration of acetic acid is 8.36 M

6 0

2 years ago