a 100gm copper block is heated in boiling water for 10min and then it is dropped into 150gm of water at 30 C in a 200gm calorime
1 answer:
You might be interested in
Complete question is;
Block 1 is resting on the floor with block 2 at rest on top of it. Block 3, at rest on a smooth table with negligible friction, is attached to block 2 by a string that passes over a pulley, as shown in the attachment below. The string and pulley have negligible mass.
Block 1 is removed without disturbing block 2.
Derive an equation for the acceleration of block 3 for any arbitrary values of m3 and m2. Express your answer in terms of m3, m2, and physical constants as appropriate.
Answer:
a = (m2)g/(m3 + m2)
Explanation:
Looking at the attached image, if we consider the free body diagram for block 3, by using Newton's first law of motion, we will arrive at the formula;
T = (m3)a - - - (eq 1)
where;
T is the tension in the string
a is acceleration
m3 is mass of block 3
Meanwhile doing the same with Block 2, the free body diagram would give us the formula; (m2)g - T = (m2)a
Making T the subject gives us;
T = (m2)g - (m2)a - - - (eq 2)
where;
g is acceleration due to gravity
T is the tension in the string
a is acceleration
m2 is mass of block 2
To solve for the acceleration, we will just substitute (m3)a for T in eq 2.
Thus;
(m3)a = (m2)g - (m2)a
(m3)a + (m2)a = (m2)g
a(m3 + m2) = (m2)g
a = (m2)g/(m3 + m2)
