You're looking for the extreme values of 
subject to the constraint 
.
The target function has partial derivatives (set equal to 0)
so there is only one critical point at 
. But this point does not fall in the region . There are no extreme values in the region of interest, so we check the boundary.
Parameterize the boundary of by
with 
. Then 
can be considered a function of 
alone:
has critical points where 
:
but 
for all , so this case yields nothing important.
At these critical points, we have temperatures of
so the plate is hottest at (1, 0) with a temperature of 14 (degrees?) and coldest at (-1, 0) with a temp of -12.
The answer should be C. By combining like terms you can find the answer. 1.75a+2.75a = 4.5a
2.25b + 1.75b = 4b
2.25c + 1.25c = 3.5c
Answer:
(a)The missing measurements are 9 feet and 
.
(b)Therefore, the length of the fence is 
Step-by-step explanation:
The diagram of the yard is attached below.
(a)I have labeled the missing dimensions of the yard as x and y.
Therefore:
Similarly:
The missing measurements are 9 feet and .
(b)Length of the Fence
The fence is rectangular shaped with:
Length = 
Width = 
Perimeter of a Rectangle = 2(L+W)
Therefore, the length of the fence
Machine should abide by te following:
4.225<Machine<4.233 The margin of acceptance
:
4.233-4.225 = 0.008cm.
Any thickness greater than 4.233+0.008 or smaller than 4.225-0.008
or <4.233cm & >4.217
