Answer:
12 N/cm²
Explanation:
From the question given above, the following data were obtained:
Weight (W) of block = 240 N
Area (A) = 20 cm²
Pressure (P) =?
Next, we shall determine the force exerted by the block. This can be obtained as follow:
Weight (W) of block = 240 N
Force (F) =.?
Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,
Force (F) = Weight (W) of block = 240 N
Force (F) = 240 N
Finally, we shall determine the pressure on the floor as follow:
Force (F) = 240 N
Area (A) = 20 cm²
Pressure (P) =?
P = F/A
P = 240 / 20
P = 12 N/cm²
Therefore, the pressure on the floor is 12 N/cm².
If the mass of the cylinder increases, the temperature of the water increases, because a greater mass means the cylinder has more potential energy that can be converted to thermal energy, increasing the temperature of the water.
<span>The formulas are,
v1d1² = v2d2² ........ (1)
h = (v2²-v1²)/2g ...... (2)
Given that,
v1 = 1.71 m/s
we assume that the stream has decreased by a factor
d2 =0.805d1
then,
v1d1² = v2 (0.805d1)²
cancelled both side d1² then we get,
v1 = v2 (0.805)²
v1 = v2 (0.648025)
Sub v1 = 1.71,
1.71 = v2 (0.648025)
v2 = 1.71/0.648025
v2 = 2.638787083831642
v2 = 2.64 m/s
The vertical distance formula,
h = (v2²-v1²)/2g
We know that value of gravity constant is 9.8 m/s²
h = {(2.64)² - (1.71)²)/2(9.8)
h = {(6.9696) - (2.9241)}/19.6
h = (4.0455)/19.6
h = 0.2064030612244898
h = 0.21 cm
Therefore, the vertical distance h = 0.21 cm.</span>
Answer: 592.37m
Explanation:
Person D is the blue line.
The total displacement is equal to the difference between the final position and the initial position, if the initial position is (0,0) we have that he first goes down two blocks, then right 6 blocks. then up 4 blocks, then left 1 block.
Now i will considerate that the positive x-axis is to the right and the positive y-axis is upwards.
Then the new position will be, if B is a block:
P =(6*B - 1*B, -2*B + 4*B) = (5*B, 2*B)
And we know that B = 110m
P = (550m, 220m)
Now, then the displacement will be equal to the magnitude of our vector, (because the difference between P and the initial position is equal to P, as the initial position is (0,0)) this is:
P = √(550^2 + 220^2) = 592.37m
