The reading on the scale is the tension on the string that connects the two objecst. In order to support the blocks it must pull the weights by a force magnitude of W. So, the tension of the rope is W. Therefore, the reading on the scale is W, D.
I hope my answer has come to your help. Thank you for posting your question here in Brainly. We hope to answer more of your questions and inquiries soon. Have a nice day ahead!
There are huge losses in the transmission, production and usage of electricity and the reduction of these losses in order to save electricity is called as conservation of energy.
As per the statistics, there is loss of nearly 4% while the transmission of electricity. Like wise during production also, lot of electricity get wasted due to the inefficient material used. None of the production material nor the equipment used have 100% efficiency and thus there is always a possibility of energy wastage.
When it is said that the energy is wasted , it simply means that the energy production which should have been 100% as per calculation is not completely derived from the source due to the inefficient conversion process. For example, a turbine while rotating must convert 100 % of the water energy or water falling on it into electrical energy but the turbine is not able to do so as some of the water is lost or its energy is lost before conversion while going through the mechanical process.
Answer:
1) Recollapsing universe
2) critical universe
3) Coasting universe
Explanation:
According to the smallest ration (ratio actual mass density to current density) to largest ration, rank of models for expansion of universe are
1) Recollapsing universe -in this, metric expansion of space is reverse and universe recollapses.
2) critical universe - in this, expansion of universe is very low.
3) Coasting universe - in this, expansion of universe is steady and uniform
Answer:
Explanation:
The electric field produced by a single point charge is given by:
where
k is the Coulomb's constant
q is the charge
r is the distance from the charge
In this problem, we have
E = 1.0 N/C (magnitude of the electric field)
r = 1.0 m (distance from the charge)
Solving the equation for q, we find the charge:
