answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Angelina_Jolie [31]
2 years ago
6

: During a heavy rainstorm, water from a parking lot completely fills an 18-in.- diameter, smooth, concrete storm sewer. If the

flowrate is 10 ft3/s, determine the pressure drop in a 100-ft. horizontal section of the pipe. Repeat the problem if there is a 2-ft. change in elevation of the pipe per 100 ft. of its length.
Engineering
1 answer:
Montano1993 [528]2 years ago
7 0

Answer

diameter of parking lot = 18 in

flowrate = 10 ft³/s

pressure drop = 100 ft

using general equation

\dfrac{P_1}{\gamma}+\dfrac{v_1^2}{2g}+Z_1 = \dfrac{P_2{\gamma} + \dfrac{v_2^2}{2g} + Z_2 +\dfrac{fLV^2}{2\rho D}

V = \dfrac{Q}{A} = \dfrac{10}{\dfrac{\pi}{4}(\dfrac{18}{12})^2} = 5.66\ ft/s

\Delta P = \gamma (Z_2-Z_1) +\dfrac{fLV^2}{2\rho D}

taking f = 0.0185

at Z₁ = Z₂

\Delta P = \dfrac{0.0185 \times 100\times 1.94\times 5.66^2}{2\dfrac{18}{12} (2)}

ΔP = 0.266 psi

b) when flow is uphill z₂-z₁ = 2

\Delta P =62.4\times 2 \times \dfrac{1}{144} +0.266

\Delta P= 1.13\ psi

c) When flow is downhill  z₂-z₁ = -2

\Delta P =62.4\times 2 \times \dfrac{1}{144} +0.266

\Delta P=-0.601\ psi

You might be interested in
A gas metal arc welder is also known as a _____ welder.
dusya [7]

Answer:

Metal inert gas or Metal Active Gas

Explanation:

Gas Metal Arc Welder(GMAW) also is also termed as Metal Inert Gas(MIG) welder or Metal Active Gas (MAG) welder.

Gas Metal Arc welding is a process in which 2 metal pieces are melted through the use of electricity and joined together. A continuous wire is fed through the welding gun, which heats up the metal. This type of welding was introduced back in 1949 and was used for welding of Aluminium.

7 0
2 years ago
A well-insulated tank in a vapor power plant operates at steady state. Saturated liquid water enters at inlet 1 at a rate of 125
kompoz [17]

Answer:

a. The mass flow rate (in lbm/s) is 135lbm/s

b. The temperature (in o F) is 200.8°F

Explanation:

We assume that potential energy and kinetic energy are negligible and the control volume operates at a steady state.

Given

a. The mass flow rate (in lbm/s) is 135lbm/s

b.

m1 = Rate at inlet 1 = 125lbm/s

m2 = Rate at inlet 2 = 10lbm/s

The mass flow rate (in lbm/s) is calculated as m1 + m2

Mass flow rate = 125lbm/s + 10lbm/s

Mass flow rate = 135lbm/s

Hence, the mass flow rate (in lbm/s) is 135lbm/s

b. To calculate the temperature.

First we need to determine the enthalpy h1 at 14.7psia

Using table A-3E (thermodynamics)

h1 = 180.15 Btu/Ibm

h2 at 14.7psia and 60°F = 28.08 Btu/Ibm

Calculating h3 using the following formula

h3 = (h1m1 + h2m2) / M3

h3 = (180.15 * 125 + 28.08 * 10)/135

h3 = 168.8855555555555

h3 = 168.89 Btu/Ibm

To get the final temperature; we make use of table A-2E of thermodynamics.

Because h3 < h1, it means the liquid is at a compressed state.

The corresponding temperature at h3 = 168.89 is 200.8°F

The temperature (in o F) is 200.8°F

6 0
2 years ago
Anytime scaffolds are assembled or __________, a competent person must oversee the operation.
egoroff_w [7]
D. made because made is a synonym for assembled
4 0
2 years ago
Read 2 more answers
1. A spur gear made of bronze drives a mid steel pinion with angular velocity ratio of 13 /2 : 1. Thepressure angle is 14 1/2° .
Alik [6]

Answer:

Given data

w1/w2=6.5/1

Power=5 KW

wp=1800 rpm

angle=14 degrees

Based on above values,the minimum diameter=30 mm

5 0
2 years ago
You work in Madison, Wisconsin. It is January and the area has been hit with bad weather. Another weather front is expected to a
Lelu [443]

Answer:

The best first sentence of your e-mail will be-

<u>Weather forecasters are predicting a blizzard this afternoon, so, as a result of this news, our supervisor has decided to close the office at noon so people can travel home safely.</u>

<u />

5 0
2 years ago
Other questions:
  • Determine the amount of gamma and alpha phases in a 10-kg, 1060 steel casting as it is being cooled to the following temperature
    6·1 answer
  • 3. (20 points) Suppose we wish to search a linked list of length n, where each element contains a key k along with a hash value
    7·1 answer
  • Oil in an engine is being cooled by air in a cross-flow heat exchanger, where both fluids are unmixed. Oil (cp = 2000 J/kg. K) f
    12·1 answer
  • A circular ceramic plate that can be modeled as a blackbody is being heated by an electrical heater. The plate is 30 cm in diame
    15·1 answer
  • Steam flows at steady state through a converging, insulated nozzle, 25 cm long and with an inlet diameter of 5 cm. At the nozzle
    11·1 answer
  • Define a function pyramid_volume with parameters base_length, base_width, and pyramid_height, that returns the volume of a pyram
    10·1 answer
  • With thermodynamics, one cannot determine ________.
    14·1 answer
  • Two airstreams are mixed steadily and adiabatically. The first stream enters at 35°C and 30 percent relative humidity at a rate
    6·1 answer
  • An equation used to evaluate vacuum filtration is Q = ΔpA2 α(VRw + ARf) , Where Q ≐ L3/T is the filtrate volume flow rate, Δp ≐
    13·1 answer
  • Most fatal collisions in Florida happen during
    8·2 answers
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!