The two situations are similar because in both you are trying to minimize the damage and make the best out of a bad situation
When an airplane is flying straight and level at a constant speed, the lift it produces balances its weight, and the thrust it produces balances its drag. However, this balance of forces changes as the airplane rises and descends, as it speeds up and slows down, and as it turns.
Summary:
a= 12.0 m/(s^2)
v= 100m/s
t1= 2.0s => s1=?
t2=5.0s => s2=?
t3=10.0s => s3=?
——————
Solution:
• when t1=2.0 s, I have gone:
S1= v*t1 + 1/2*a*(t1^2)
=100.0 *2 + 1/2*12.0*(2.0^2)
=224 (m)
• when t2=5.0s, I have gone
S2=v*t2+ 1/2*a*(t2^2)
= 100*5.0+ 1/2*12.0*(5.0^2)
=650 (m)
•when t3= 10.0s, I have gone:
S3=v*t3+ 1/2*a*(t3^2)
=100*10.0+ 1/2*12*(10.0^2)
=1600 (m)
Answer:
Yes, ultraviolet light can turn a rubber into solid due to prolong exposure.
Explanation:
A rubber is a material with an elastic property, causing it to be deform by an external force but takes its shape when the force is removed. Light is an electromagnetic wave which causes the sensation of vision. It transfers energy to a medium during propagation through the medium.
Generally, most light do not cause hardness of a rubber. But an ultraviolet light can cause rubber to become solid over a period of time. This is possible if there is a prolong exposure of the rubber, and because of the evaporation of volatiles in the polymer material. Ultraviolet light are known to cause a rubber to become solid.
