All categories

2 years ago

NEC articles 725.143 and ______ permit attaching the low-voltage thermostat cable to the EMT that brings power to the furnace.

Engineering

1 answer:

Iteru [2.4K]2 years ago

8 0

Answer:

800.24

Explanation:

National Electrical Code (NEC), articles 725.143 and 800.24 permit attaching the low-voltage thermostat cable to the EMT that brings power to the furnace in accordance with with NEC 300.11.

You might be interested in

You work in Madison, Wisconsin. It is January and the area has been hit with bad weather. Another weather front is expected to a

Lelu [443]

Answer:

The best first sentence of your e-mail will be-

<u>Weather forecasters are predicting a blizzard this afternoon, so, as a result of this news, our supervisor has decided to close the office at noon so people can travel home safely.</u>

<u />

5 0

2 years ago

A shaft consisting of a steel tube of 50-mm outer diameter is to transmit 100 kW of power while rotating at a frequency of 34 Hz

nikitadnepr [17]

Answer:

25 - $\sqrt[4]{26.66*10^{-8} }$ mm

Explanation:

Given data

steel tube : outer diameter = 50-mm

power transmitted = 100 KW

frequency(f) = 34 Hz

shearing stress ≤ 60 MPa

Determine tube thickness

firstly we calculate the ; power, angular velocity and torque of the tube

power = T(torque) * w (angular velocity)

angular velocity ( w ) = 2 $\pi$ f = 2 * $\pi$ * 34 = 213.71

Torque (T) = power / angular velocity = 100000 / 213.71 = 467.92 N.m/s

next we calculate the inner diameter using the relation

$\frac{J}{c_{2} } = \frac{T}{t_{max} }$ = 467.92 / (60 * 10^6) = 7.8 * 10^-6 m^3

also

c2 = (50/2) = 25 mm

$\frac{J}{c_{2} }$ = $\frac{\pi }{2c_{2} } ( c^{4} _{2} - c^{4} _{1} )$ = $\frac{\pi }{0.050} [ ( 0.025^{4} - c^{4} _{1} ) ]$

therefore; 0.025^4 - $c^{4} _{1}$ = 0.050 / $\pi$ (7.8 *10^-6)

$c^{4} _{1}$ = 39.06 * 10 ^-8 - ( 1.59*10^-2 * 7.8*10^-6)

39.06 * 10^-8 - 12.402 * 10^-8 =26.66 *10^-8

$c_{1} = \sqrt[4]{26.66 * 10^{-8} }$ =

THE TUBE THICKNESS

$c_{2} - c_{1}$ = 25 - $\sqrt[4]{26.66*10^{-8} }$ mm

4 0

2 years ago

What properties should the head of a carpenter’s hammer possess? How would you manufacture a hammer head?

BabaBlast [244]

Properties of Carpenter's hammer possess

Explanation:

1.The head of a carpenter's hammer should possess the impact resistance, so that the chips do not peel off the striking face while working.

2.The hammer head should also be very hard, so that it does not deform while driving or eradicate any nails in wood.

3.Carpenter's hammer is used to impact smaller areas of an object.It can drive nails in the wood,can crush the rock and shape the metal.It is not suitable for heavy work.

How hammer head is manufactured :

1.Hammer head is produced by metal forging process.

2.In this process metal is heated and this molten metal is placed in the cavities said to be dies.

3.One die is fixed and another die is movable.Ram forces the two dies under the forces which gives the metal desired shape.

4.The third process is repeated for several times.

5 0

2 years ago

6.28 A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions 4 ft from the right

dimulka [17.4K]

Answer:

Assume Base free flow speed (BFFS) = 70 mph

Lane width = 10 ft