The hoop is attached.
Consider that the friction force is given by:
F = μ·N
= μ·m·g·cosθ
We also know, considering the forces of the whole system, that:
F = -m·a + m·g·sinθ
and
a = (1/2)·<span>g·sinθ
Therefore:
</span>-(1/2)·m·g·sinθ + m·g·sinθ = <span>μ·m·g·cosθ
</span>(1/2)·m·g·sinθ = <span>μ·m·g·cosθ
</span>μ = (1/2)·m·g·sinθ / <span>m·g·cosθ
= </span>(1/2)·tanθ
Now, solve for θ:
θ = tan⁻¹(2·μ)
= tan⁻¹(2·0.9)
= 61°
Therefore, the maximum angle <span>you could ride down without worrying about skidding is
61°.</span>
Answer:
Explanation:
a ) No of turns per metre
n = 450 / .35
= 1285.71
Magnetic field inside the solenoid
B = μ₀ n I
Where I is current
B = 4π x 10⁻⁷ x 1285.71 x 1.75
= 28.26 x 10⁻⁴ T
This is the uniform magnetic field inside the solenoid.
b )
Magnetic field around a very long wire at a distance d is given by the expression
B = ( μ₀ /4π ) X 2I / d
= 10⁻⁷ x 2 x ( 1.75 / .01 )
= .35 x 10⁻⁴ T
In the second case magnetic field is much less. It is due to the fact that in the solenoid magnetic field gets multiplied due to increase in the number of turns. In straight coil this does not happen .
Answer:
, 
Explanation:
The jet is flying at constant velocity: this means that its acceleration is zero, so the net force acting on the jet is also zero.
Therefore, we can write:
where
is the thrust force generated by each engine of the jet
is the drag force
Solving for Fd,
The velocity of the jet is
So, the rate at which the drag force does work (which is the power) is
and substituting
we find
Converting into horsepower,
Answer:
0.68 m
Explanation:
α = dL / L1*(dT)
dL = L1(dT) * α
Initial length, L1 = 100
Chang in Length =dL
α linear expansivity ; dL = change in length ; dT = change in temperature ; L1 = initial length
α of iron rod = 1.13 * 10^-5 k
dL = 100(40 - 10) * 1.13 * 10^-5
dL = 100(30) * 1.13 * 10^-5
dL = 3000 * 1.13 * 10^-5
dL = 3390 * 10^-5
dL = 0.0339 m
Error :
Distance measured = 2km = (2 * 1000) = 2000m
[Distance measured / (initial length + change in length)] × change in length
Error = (2000 / (100 + 0.0339)) * 0.0339
Error = (2000 / 100.0339) * 0.0339
Error = 19.993222 * 0.0339
Error = 0.6777702
Error = 0.68 m
The velocity would switch on the cars
