Ask question

Ask question

All categories

2 years ago

11

A flask contains equal masses of f2 and cl2 with a total pressure of 2.00 atm at 298k. What is the partial pressure of cl2 in th

e flask?

1 answer:

Sindrei [870]2 years ago

7 0

Answer:

Partial Pressure of F₂ = 1.30 atm

Partial pressure of Cl₂ = 0.70 atm

Explanation:

Partial pressure for gases are given by Daltons law.

Total pressure of a gas mixture = sum of the partial pressures of individual gases

Pt = P(f₂) + P(cl₂)

Partial pressure = mole fraction × total pressure

Let the mass of each gas present be m

Number of moles of F₂ = m/38 (molar mass of fluorine = 38 g/Lol

Number of moles of Cl₂ = m/71 (molar mass of Cl₂)

Mole fraction of F₂ = (m/38)/((m/38) + (m/71)) = 0.65

Mole fraction of Cl₂ = (m/71)/((m/38) + (m/71)) = 0.35 or just 1 - 0.65 = 0.35

Partial Pressure of F₂ = 0.65 × 2 = 1.30 atm

Partial pressure of Cl₂ = 0.35 × 2 = 0.70 atm

You might be interested in

If a rock is thrown upward on the planet mars with a velocity of 11 m/s, its height (in meters) after t seconds is given by h =

Butoxors [25]

(a) 3.56 m/s
(b) 11 - 3.72a
(c) t = 5.9 s
(d) -11 m/s
For most of these problems, you're being asked the velocity of the rock as a function of t, while you've been given the position as a function of t. So first calculate the first derivative of the position function using the power rule.
y = 11t - 1.86t^2
y' = 11 - 3.72t
Now that you have the first derivative, it will give you the velocity as a function of t.
(a) Velocity after 2 seconds.
y' = 11 - 3.72t
y' = 11 - 3.72*2 = 11 - 7.44 = 3.56
So the velocity is 3.56 m/s
(b) Velocity after a seconds.
y' = 11 - 3.72t
y' = 11 - 3.72a
So the answer is 11 - 3.72a
(c) Use the quadratic formula to find the zeros for the position function y = 11t-1.86t^2. Roots are t = 0 and t = 5.913978495. The t = 0 is for the moment the rock was thrown, so the answer is t = 5.9 seconds.
(d) Plug in the value of t calculated for (c) into the velocity function, so:
y' = 11 - 3.72a
y' = 11 - 3.72*5.913978495
y' = 11 - 22
y' = -11
So the velocity is -11 m/s which makes sense since the total energy of the rock will remain constant, so it's coming down at the same speed as it was going up.

3 0

2 years ago

If the wire is replaced by an infinite current sheet with density Js = 0.40 A/m, what would be the magnetic flux (in T · m2) thr

oksian1 [2.3K]

Answer:

$\phi _{B} =0.855 T-m^{-2}$

Explanation:

given data

density of current sheet = 0.40 A/m

length a = 0.27 m

width b = 0.63 m

For infinite sheet, magnetic field is given as

$B = \mu _{O}J$

magnetic flux is given as

$\phi _{B} = BA$

$= \mu _{O}Jab$

$= 4\pi *0.40*0.27*0.63$

$\phi _{B} =0.855 T-m^{-2}$

6 0

2 years ago

Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flowmeters in which the magneti

san4es73 [151]

A) $1.36\cdot 10^{-4}T$

The magnetic field at the center of a coil of N turns is given by

$B=\frac{\mu_0 N I}{2R}$

where

I is the current in the coil

N is the number of turns

R is the radius of the coil

Here we have

I = 6.5 A is the current in the coil

N = 100 is the number of turns

$R=\frac{6.0 m}{2}=3.0 m$ is the radius of the coil

Substituting,

$B=\frac{(4\pi \cdot 10^{-7} H/m)(100)(6.5 A)}{2(3.0 m)}=1.36\cdot 10^{-4}T$

B) The force points north

The direction of the force on a positive ion in water can be found by using the right-hand rule. In fact, we have:

- Index finger: direction of motion of the ion --> towards east

- Middle finger: direction of magnetic field --> downward

- Thumb: direction of the force --> towards north

So, the force points north.

C) $3.26\cdot 10^{-23}N$

The magnitude of the magnetic force on a charged particle moving perpendicularly to the field is

$F=qvB$

where

q is the charge of the particle

v is the velocity

B is the magnitude of the magnetic field

In this case, we have

$q=+e=1.6\cdot 10^{-19} C$ is the charge

$v=1.5 m/s$ is the velocity

$B=1.36\cdot 10^{-4}T$ is the magnetic field strength

Substituting,

$F=(1.6\cdot 10^{-19} C)(1.5 m/s)(1.36\cdot 10^{-4}T)=3.26\cdot 10^{-23}N$

8 0

2 years ago

A.Whale communication. Blue whales apparently communicate with each other using sound of frequency 17.0 Hz, which can be heard n

Y_Kistochka [10]

A. 90.1 m

The wavelength of a wave is given by:

$\lambda=\frac{v}{f}$

where

v is the speed of the wave

f is its frequency

For the sound emitted by the whale, v = 1531 m/s and f = 17.0 Hz, so the wavelength is

$\lambda=\frac{1531 m/s}{17.0 Hz}=90.1 m$

B. 102 kHz

We can re-arrange the same equation used previously to solve for the frequency, f:

$f=\frac{v}{\lambda}$

where for the dolphin:

v = 1531 m/s is the wave speed

$\lambda=1.50 cm=0.015 m$ is the wavelength

Substituting into the equation,

$f=\frac{1531 m/s}{0.015 m}=1.02 \cdot 10^5 Hz=102 kHz$

C. 13.6 m

Again, the wavelength is given by:

$\lambda=\frac{v}{f}$

where

v = 340 m/s is the speed of sound in air

f = 25.0 Hz is the frequency of the whistle

Substituting into the equation,

$\lambda=\frac{340 m/s}{25.0 Hz}=13.6 m$

D. 4.4-8.7 m

Using again the same formula, and using again the speed of sound in air (v=340 m/s), we have:

- Wavelength corresponding to the minimum frequency (f=39.0 Hz):

$\lambda=\frac{340 m/s}{39.0 Hz}=8.7 m$

- Wavelength corresponding to the maximum frequency (f=78.0 Hz):

$\lambda=\frac{340 m/s}{78.0 Hz}=4.4 m$

So the range of wavelength is 4.4-8.7 m.

E. 6.2 MHz

In order to have a sharp image, the wavelength of the ultrasound must be 1/4 of the size of the tumor, so

$\lambda=\frac{1}{4}(1.00 mm)=0.25 mm=2.5\cdot 10^{-4} m$

And since the speed of the sound wave is

v = 1550 m/s

The frequency will be

$f=\frac{v}{\lambda}=\frac{1550 m/s}{2.5\cdot 10^{-4} m}=6.2\cdot 10^6 Hz=6.2 MHz$

3 0

2 years ago

Kate is working on a project in her tech education class. She plans to assemble a fan motor. Which form of energy does the motor

grin007 [14]

The job that the fan is designed and built to do is to convert the electrical energy it uses into the kinetic (motion) energy of moving air.

I can't really guarantee that it accomplishes that with MOST of the electrical energy it uses, because I don't know how efficient your fan is. For example, if it's a really old fan, and one blade has the end broken off, and a lot of dust and mosquitoes have gotten into the motor, and it shakes and vibrates and makes a lot of noise when it's running, then it's converting a lot of the electrical energy into thermal energy (it gets hot when it runs) and some into sound energy too.

If you can live without the word "most" in the question, then we can assume that the fan is well designed and running like a top, and the answer is definitely choice-B .

4 0

2 years ago