12.) Draw a strain gauge circuit and its external components to attach to a package weighing system designed to measure the load
on a 2 foot by 2 foot platform – would you need more than one active element – draw the installation of the SG(s) and mounting of them into the platform. What type of testing would you need to do to establish a baseline and calibration curve for this sensor?
1 answer:
You might be interested in
Answer:
the difference in pressure between the inside and outside of the droplets is 538 Pa
Explanation:
given data
temperature = 68 °F
average diameter = 200 µm
to find out
what is the difference in pressure between the inside and outside of the droplets
solution
we know here surface tension of carbon tetra chloride at 68 °F is get from table 1.6 physical properties of liquid that is
σ = 2.69 × N/m
so average radius = = 100 µm = 100 ×
m
now here we know relation between pressure difference and surface tension
so we can derive difference pressure as
2π×σ×r = Δp×π×r² .....................1
here r is radius and Δp pressure difference and σ surface tension
Δp =
put here value
Δp =
Δp = 538
so the difference in pressure between the inside and outside of the droplets is 538 Pa