The first step is to figure out the lightest and the heaviest bad. The lightest bag is 4 1/4 and the heaviest is 5 3/4. Now to subtract, you can't subtract this as a mixed fraction so turn each fraction into an improper fraction by multiplying the whole number by the denominator then adding the numerator to the product of the whole number multiplied by the denominator (if you didn't know numerator is the top and the denominator is the bottom. To find out 4 1/4 as an improper fraction follow these steps (4*4+1=17) so 4 1/4=17/4. The process is the same for 5 3/4 (5*4+3=23) so 5 3/4= 23/4. Now to subtract, you subtract the numerator but not the denominator. You subtract because the question asks how many more and that means to subtract 23/4-17/4= 6/4. Last step is to turn this back into a mixed fraction do that by dividing the numerator by the denominator, 6 divided by 4 equals 1.5 and turn the decimal into a fraction 1 is a whole number so you don't change that but the 5 behind the decimal needs to be changed so now 1.5= 1 5/10 and last step is simplify 1 1/2. Hope this helped :).
No it does NOT make sense to state density in kilograms per square meter. Density has to be stated in terms of mass per unit of volume and NOT per unit of area.
<span> 4 cups of tea are poured per minute 2 hours = 2 x 60 = 120 minutes so in 2 hours = 120 x 4 = 480 cups </span><span>16 cups in one gallon then </span><span>480 / 16 = 30 gallons
A reflection across they x-axis would put all the points in the right section and on the right y value. The x value would need to be changed though. So, you would need to do a translation of 4 on all points.