Answer:
t=0.704s
Explanation:
A child is running his 46.1 g toy car down a ramp. The ramp is 1.73 m long and forms a 40.5° angle with the flat ground. How long will it take the car to reach the bottom of the ramp if there is no friction?
from newton equation of motion , we look for the y component of the speed and look for the x component of the speed. we can then find the resultant of the speed

Vy^2=0+2*9.8*1.73sin40.5
Vy^2=22.021
Vy=4.69m/s
Vx^2=u^2+2*9.81*cos40.5
Vy^2=25.81
Vy=5.08m/s
V=(Vy^2+Vx^2)^0.5
V=47.71^0.5
V=6.9m/s
from newtons equation of motion we know that force applied is directly proportional to the rate of change in momentum on a body.
f=force applied
v=velocity final
u=initial velocity
m=mass of the toy, 0.046
f=ma
f=m(v-u)/t
v=u+at
6.9=0+9.8t
t=6.9/9.81
t=0.704s
Answer:
Current, I = 1000 A
Explanation:
It is given that,
Length of the copper wire, l = 7300 m
Resistance of copper line, R = 10 ohms
Magnetic field, B = 0.1 T

Resistivity, 
We need to find the current flowing the copper wire. Firstly, we need to find the radius of he power line using physical dimensions as :




r = 0.00199 m
or

The magnetic field on a current carrying wire is given by :



I = 1000 A
So, the current of 1000 A is flowing through the copper wire. Hence, this is the required solution.
Answer:
Cis, Trans.
Explanation:
Rhodopsin also known as visual purple, pigment which contains sensory protein that helps to convert light into an electrical signal. Rhodopsin present in wide range of organisms from bacteria to vertebrates.
Rhodopsin is composed of opsin, and 11-cis-retinaldehyde which is derived from vitamin A. When the eye contact with light the 11-cis component converted to all trans-retinal, which results in the changes in configuration fundamental in the rhodopsin molecule.
Answer:
a. directive zoning
Explanation:
Directive zoning is an instrument used in master plans, whereby the city is divided into areas on which differentiated land use and land use guidelines apply, especially urban indexes. Directive zoning acts primarily by controlling two main elements: the use and size (or size) of lots and buildings. It is therefore assumed that the end result achieved through individual actions is in line with the municipality's objectives, which include proportionality between occupation and infrastructure, the need to protect fragile areas and / or cultural interest, the harmony from the volumetric point of view, etc.
Answer: Mathematical Model
Explanation:
Took the test