1. For multiplication and division), we first compare the number of significant figure (let's call it SF later in the problem) that the factors have. The product will have the least numbers between them. So, for the case of 11.55 x 2.5, 11.55 has 4 SF while 2.5 has 2. So we choose the smallest which is 2 for this case. Hence, the answer is B.
2. Using the same rules as mentioned in Item 1, we first compare the number of SF in the numbers give. 975.0321 has 7 SF while 0.0003 has 1 (all zeroes not following a counting number are not significant). We now solve for the quotient and round it off to 1 SF.
(975.0321/0.0003) = 3250107. Rounding it off, we have 3000000 or 3 x 10⁶. Thus, the answer is D.
3. The rules for multiplication still apply even for more than two factors. So, let's first take note of the SF present in each factor as shown below.
0.00147 = 3 SF
8.314 = 4 SF
7.100 = 4 SF (zeroes after a counting number in the decimal place are considered significant)
From this, we can see that the product must round off to 3 SF. Multiplying the three numbers, we have
0.00147 x 8.314 x 7.100 = 0.086773218
So, the product rounded off to 3 SF is 0.0868 or 8.68 x 10⁻². So, the answer must be C<span>.
</span>
Answer:
Step-by-step explanation:
Equation: 
Jalil says it is not possible to isolate x because x has a different unknown coefficient.
Victoria t. Victoria believes there is a solution
Solving the equation:
So, this shows x can be isolated .
Victoria was right .
It was not possible to isolate x if the coefficients of x would be same .
But in the given equation the coefficients of x are not same .
So, Victoria is right.
Answer:
The parameters of the exponential distribution is 0.0133.
Step-by-step explanation:
Exponential distribution is a continuous probability distribution.
The density function of exponential distribution is,
Here the parameter θ is the reciprocal of the mean of the random variable <em>X</em>.
The random variable <em>X</em> has an average value of 75 seconds.
Compute the parameters of the exponential distribution as follows:
Thus, the parameters of the exponential distribution is 0.0133.
If m1 and m2 are the slopes of each line, for them to be perpendicular you gotta solve
m1 * m2 = -1
First you convert the percentage into a decimal. 18% to 0.18, then you multiply that decimal to the price of the item being discounted and bam, you have your price.
