<span>When a pan containing liquid and solid water (ice water) is put over the flame of a stove and stirred vigorously:</span> <span>2. the temperature rises but only after the ice melts.
It is known that ice lower the temperature of solution, after ice is melt temperature of liquid start to rise normally. Temperature of ice is 0</span>°C.
3.98 x 10⁻¹⁹ Joule
<h3>Further explanation</h3>
<u>Given:</u>
The green light has a frequency of about 6.00 x 10¹⁴ s⁻¹.
<u>Question:</u>
The energy of a photon of green light (in joules).
<u>The Process:</u>
The energy of a photon is given by 
- E = energy in joules
- h = Planck's constant 6.63 x 10⁻³⁴ Js
- f = frequency of light in Hz (sometimes the symbol f is written as v)
Let us find out the energy of the green light emitted per photon.
Thus, we get a result of 
- - - - - - - - - -
Notes
- When an electron moves between energy levels it must emit or absorb energy.
- The energy emitted or absorbed corresponds to the difference between the two allowed energy states, i.e., as packets of light called photons.
- A higher energy photon corresponds to a higher frequency (shorter wavelength) of light.
<h3>Learn more</h3>
- The energy of the orange light emitted per photon brainly.com/question/2485282#
- Determine the density of our sun at the end of its lifetime brainly.com/question/5189537
- Find out the kinetic energy of the emitted electrons when metal is exposed to UV rays brainly.com/question/5416146
Keywords: green light, frequency, the energy, a photon, Planck's constant, electrons, emitted, wavelength, joules
Answer:
Warm air rises, resulting in a decrease air pressure.
Explanation:
Tornado is the rapid and violent rotation of column of air which move from the thunderstorm to the ground.
It is formed when there is collision between warm and cold air. The cold air which is more sense than the warm air is pushed over the warm air which result in thunderstorms. The warm air then rises which result in decrease air pressure causing an updraft. The updraft then begin to rotate as there are variations in wind speeds and directions.
Answer:
1. Galvanic oxidation. Example is the corrosion of aluminium wires when in contact with copper wires under wet conditions.
2. Rainwater or Damp/moist air
3. Chromium-plated steel screws or stainless steel screws or galvanized steel screws
Explanation:
1. Galvanic oxidation or corrosion occurs when two different metals with different electrode potentials are brought into contact with each other by means of an electrolyte (usually a aqueous solution), such that a redox reaction occurs leading to one metal with the more negative electrode potential (the anode) becoming oxidized, while the other less negative potential (the cathode) is reduced.
In order for galvanic corrosion to occur, three elements are required.
i. Two metals with different corrosion potentials (anode and cathode)
ii. Direct metal-to-metal electrical contact
iii. A conductive electrolyte solution (e.g. water) must connect the two metals on a regular basis.
For example oxidation (corrosion) of aluminium wires when in contact with copper wire under wet conditions.
2. The most likely electrolyte will be rainwater containing dissoved solutes (if the panel is in an exposed part of the house) or damp/moist air.
3. From the table, the most likely screw will be chromium-plated steel screws or stainless steel (made of iron and nickel) screws or galvanized steel (zinc-plated) screws.
All these possible screw components have a more negative electrode potential than copper. Thus they will serve as the anode in a galvanic oxidation with copper.
Here we will use the general formula of Nernst equation:
Ecell = E°Cell - [(RT/nF)] *㏑Q
when E cell is cell potential at non - standard state conditions
E°Cell is standard state cell potential = - 0.87 V
and R is a constant = 8.314 J/mol K
and T is the temperature in Kelvin = 73 + 273 = 346 K
and F is Faraday's constant = 96485 C/mole
and n is the number of moles of electron transferred in the reaction=2
and Q is the reaction quotient for the reaction
SO42-2(aq) + 4H+(aq) +2Br-(aq) ↔ Br2(aq) + SO2(g) +2H2O(l)
so by substitution :
0 = -0.87 - [(8.314*346K)/(2* 96485)*㏑Q → solve for Q
∴ Q = 4.5 x 10^-26
