Answer:
w = √ 1 / CL
This does not violate energy conservation because the voltage of the power source is equal to the voltage drop in the resistence
Explanation:
This problem refers to electrical circuits, the circuits where this phenomenon occurs are series RLC circuits, where the resistor, the capacitor and the inductance are placed in series.
In these circuits the impedance is
X = √ (R² + (
-
)² )
where Xc and XL is the capacitive and inductive impedance, respectively
X_{C} = 1 / wC
X_{L} = wL
From this expression we can see that for the resonance frequency
X_{C} = X_{L}
the impedance of the circuit is minimal, therefore the current and voltage are maximum and an increase in signal intensity is observed.
This does not violate energy conservation because the voltage of the power source is equal to the voltage drop in the resistence
V = IR
Since the contribution of the two other components is canceled, this occurs for
X_{C} = X_{L}
1 / wC = w L
w = √ 1 / CL
Answer:
The answer is "effective stress at point B is 7382 ksi
"
Explanation:
Calculating the value of Compressive Axial Stress:
![\to \sigma y =\frac{F}{A} = \frac{4 F}{( p d ^2 )} = \frac{(4 x ( - 40000 \ lbf))}{[ p \times (1 \ in)^2 ]} = - 50.9 \ ksi \\](https://tex.z-dn.net/?f=%5Cto%20%5Csigma%20y%20%20%3D%5Cfrac%7BF%7D%7BA%7D%20%3D%20%5Cfrac%7B4%20F%7D%7B%28%20p%20d%20%5E2%20%29%7D%20%3D%20%5Cfrac%7B%284%20x%20%28%20-%2040000%20%5C%20lbf%29%29%7D%7B%5B%20p%20%5Ctimes%20%281%20%5C%20in%29%5E2%20%5D%7D%20%3D%20-%2050.9%20%5C%20ksi%20%5C%5C)
Calculating Shear Transverse:
![\to \sigma' =[ s y^2 +3( t \times y^2 + t yz^2 )] \times \frac{1}{2}\\\\](https://tex.z-dn.net/?f=%5Cto%20%5Csigma%27%20%3D%5B%20s%20y%5E2%20%2B3%28%20t%20%5Ctimes%20y%5E2%20%2B%20t%20yz%5E2%20%29%5D%20%5Ctimes%20%5Cfrac%7B1%7D%7B2%7D%5C%5C%5C%5C)
![= [ (-50.9)^2 +3((63.7)^2 +(0.17)^2 )] \times \frac{1}{2}\\\\=[2590.81+ 3(4057.69)+0.0289]\times \frac{1}{2}\\\\=[2590.81+12,173.07+0.0289] \times \frac{1}{2}\\\\=14763.9089\times \frac{1}{2}\\\\ = 7381.95445 \ ksi\\\\ = 7382 \ ksi](https://tex.z-dn.net/?f=%3D%20%5B%20%28-50.9%29%5E2%20%2B3%28%2863.7%29%5E2%20%2B%280.17%29%5E2%20%29%5D%20%5Ctimes%20%5Cfrac%7B1%7D%7B2%7D%5C%5C%5C%5C%3D%5B2590.81%2B%203%284057.69%29%2B0.0289%5D%5Ctimes%20%5Cfrac%7B1%7D%7B2%7D%5C%5C%5C%5C%3D%5B2590.81%2B12%2C173.07%2B0.0289%5D%20%5Ctimes%20%5Cfrac%7B1%7D%7B2%7D%5C%5C%5C%5C%3D14763.9089%5Ctimes%20%5Cfrac%7B1%7D%7B2%7D%5C%5C%5C%5C%20%3D%207381.95445%20%5C%20ksi%5C%5C%5C%5C%20%3D%207382%20%5C%20ksi)
DE which is the differential equation represents the LRC series circuit where
L d²q/dt² + Rdq/dt +I/Cq = E(t) = 150V.
Initial condition is q(t) = 0 and i(0) =0.
To find the charge q(t) by using Laplace transformation by
Substituting known values for DE
L×d²q/dt² +20 ×dq/dt + 1/0.005× q = 150
d²q/dt² +20dq/dt + 200q =150
Answer:
a S orbital
Explanation:
Atomic orbitals is the place where we are most likely to find at least one electron, this definition is based on the equation posed by Erwin Schrödinger.
It is said that each electron occupies an atomic orbital that is defined by a series of quantum numbers s, n, ml, ms. In any atom each orbital can contain two electrons. It is possible that thanks to the function of the orbitals, the appearance that atoms can have is that of a diffuse cloud.
The orbitals s (l = 0) have a spherical shape. The extent of this orbital depends on the value of the main quantum number, so a 3s orbital has the same shape but is larger than a 2s orbital.
The orbitals p (l = 1) are formed by two identical lobes that project along an axis. The junction zone of both lobes coincides with the atomic nucleus. There are three orbitals p (m = -1, m = 0 and m = + 1) in the same way, which differ only in their orientation along the x, y or z axes.
The orbitals d (l = 2) are also formed by lobes. There are five types of d orbitals (corresponding to m = -2, -1, 0, 1, 2)
All you need to know for this question is Ohm’s Law:
V=IR
I=V/R
R=V/I
So, the answer is (3) Resistance, since it is inversely proportional to Current (I=V/R)
