Answer:
0x2+9x-3x-27 6x-27
Step-by-step explanation:
Answer:
The graph is shown below.
Step-by-step explanation:
Given:
The inequality of a line to graph is given as:

In order to graph it, we first make the 'inequality' sign to 'equal to' sign. This gives,

Now, we plot this line on a graph. The given line is of the form:
Where, 'm' is the slope and 'b' is the y-intercept.
So, for the line
, 
The y-intercept is at (0, -3).
In order to draw the line correctly we find another point. Let the 'y' value be 0.
Now, 
So, the point is (3, 0).
Now, we mark these points and draw a line passing through these two points.
Now, consider the line inequality
. The 'y' value is less than
. So, the solution region will be region below the line and excluding all the points on the line. So, we draw a broken line and shade the region below it.
The graph is shown below.
Answer:
89 hours
Step-by-step explanation:
First solve all the deductions.
For each multiply the $10, which you are paid, and the percentage.
For FICA: $10 x 0.0765 = $0.77 per hr
For Fed tax: $10 x 0.12 = $1.2 per hr
For State tax: $10 x 0.08 = $0.8 per hr
Now subtract the remaining pay:
10 – 0.77 – 1.2 – 0.8 = $7.23
Time required = $640 / $7.23 per hr
Time required = 89 hrs
Final answer:
89 hours
The answer:
<span>the upper and lower control limits (uclim and lclim) for mean formula is
for the mean chart
uclim= x+A2xR
where x = sum(of the value) / number of each value
and for
lclim=</span>x+A2xR
<span>
R is the range such that R= Xmax - Xmin
in the case of the sample 1: S1
the data are:
79.2 78.8 80.0 78.4 81.0
the mean is x1 = (</span>79.2 + 78.8 + 80.0 + 78.4 + 81.0) / 5= 79.48
<span>its range is R 1= 81.0 -78.4 = 2.6
we can do the same method for finding the mean chart and range for all samples
</span>S2: x2=<span> 80.14 , R2=2.3
</span>S3: x3= 80.14 , R3=1.2
S4: x4= 79.60 , R4=1.7
S5: x5= 80.02 , R5=2.0
S6: x6=80.38 , R6=1.4
<span>
therefore the average value is X= sum( x1+x2+...+x6) / 6 = 79.96
and R=sum(R1+R2+...+R6)/6=1.87
finally
range chart uclim =D4xR=3.95 and lclim is always equal to 0, because D3=0
we can say that the process is not in control.
</span>
3)AD = CD = The radius o the circle.
AD = DE = The radius o the greatest circle.
4)The sum of the angles of any triangle equate is 180 degrees.
5)Measure DCA = Measure CAD, Measure DAE = Measure AED.
9)Statment 8.