Answer:
hmax = 1/2 · v²/g
Explanation:
Hi there!
Due to the conservation of energy and since there is no dissipative force (like friction) all the kinetic energy (KE) of the ball has to be converted into gravitational potential energy (PE) when the ball comes to stop.
KE = PE
Where KE is the initial kinetic energy and PE is the final potential energy.
The kinetic energy of the ball is calculated as follows:
KE = 1/2 · m · v²
Where:
m = mass of the ball
v = velocity.
The potential energy is calculated as follows:
PE = m · g · h
Where:
m = mass of the ball.
g = acceleration due to gravity (known value: 9.81 m/s²).
h = height.
At the maximum height, the potential energy is equal to the initial kinetic energy because the energy is conserved, i.e, all the kinetic energy was converted into potential energy (there was no energy dissipation as heat because there was no friction). Then:
PE = KE
m · g · hmax = 1/2 · m · v²
Solving for hmax:
hmax = 1/2 · v² / g
Explanation :
To start any lab work initially, we have to know the theory behind the experiment. After then the experiment should be started. At the end, the readings must be taken carefully and some conclusion can be drawn.
Some of the steps are given :
Step 1: Pump up six identical bike tires to the recommended air pressure.
Step 2: Place three tires under heat lamps, and keep the other three tires at room temperature.
Step 3: After four hours, measure the circumference of each tire.
Step 4: Record your results in the table.
The fifth step should be :
Step 5: Write the result or conclusion that shows what you have done during the entire experiment.
Answer:
The maximum energy stored in the combination is 0.0466Joules
Explanation:
The question is incomplete. Here is the complete question.
Three capacitors C1-11.7 μF, C2 21.0 μF, and C3 = 28.8 μF are connected in series. To avoid breakdown of the capacitors, the maximum potential difference to which any of them can be individually charged is 125 V. Determine the maximum energy stored in the series combination.
Energy stored in a capacitor is expressed as E = 1/2CtV² where
Ct is the total effective capacitance
V is the supply voltage
Since the capacitors are connected in series.
1/Ct = 1/C1+1/C2+1/C3
Given C1 = 11.7 μF, C2 = 21.0 μF, and C3 = 28.8 μF
1/Ct = 1/11.7 + 1/21.0 + 1/28.8
1/Ct = 0.0855+0.0476+0.0347
1/Ct = 0.1678
Ct = 1/0.1678
Ct = 5.96μF
Ct = 5.96×10^-6F
Since V = 125V
E = 1/2(5.96×10^-6)(125)²
E = 0.0466Joules
Answer:
Ratio of length will be 
Explanation:
We have given time period of the pendulum when length is
is 
And when length is
time period 
We know that time period is given by

So
----eqn 1
And
-------eqn 2
Dividing eqn 2 by eqn 1

Squaring both side

<span>Answer:
Pressure is always density * gravity * depth
P = 1000 kg/m^3 * 9.81 m/s^2 * 221 m
P = 2168010 Pa</span>